Holiday deals. Holideals?Either way, start saving.Shop now

Skip to contentGo to Product Search
Main Content

PopMarket - Maschinen Krieger - ARTPLA - H.A.F.S Gladiator Late Production 1/35 Scale Model Kit (set of 2) - COLLECTIBLES - Multicolor

Model: 4537807190314
SKU: 12950971

Reviews coming soon

Sold & shipped by

About this product

From Maschinen Krieger comes the new 1/35 scale Gladiator, a large, four-legged mecha with a heavily armored combat suit! The popular Gladiator from InchMa.K.Inch (Maschinen Krieger) is now available as a 1/35 scale plastic model kit. This captivating kit combines the exquisite curves and mechanical details of Akira Tani's sculpt. By swapping parts, you can recreate the hatch open position. Each joint can be set to one of three different angles. One decal sheet with new markings is included. Scale 1/35, Overall height approx. 135mm Molding color 2 colors (olive drab, blue gray) Prototype Production Taniaki Nuber of Runners 8 in total + 1 decal This product is a plastic model that requires assembly. Plastic model adhesive is required for assembly. The images shown are development samples and may differ slightly from the actual product. Thank you for your understanding.

Features

  • COLLECTIBLES

    ARTPLA HAFS GLADIATOR LATE PRODUTION TYPE SET OF 2 Studio/Label/Brand: Kaiyodo

  • Anime Collectibles

  • Gifts

  • Anime Collectibles

Specifications

  • Brand
    PopMarket
    Model Number
    4537807190314
    Product Name
    Maschinen Krieger - ARTPLA - H.A.F.S Gladiator Late Production 1/35 Scale Model Kit (set of 2) - COLLECTIBLES
    Color
    Multicolor
    Recommended Minimum Age
    13 years
    Number of Figures Included
    1
Sponsored

Reviews

This product doesn't have any reviews yet.

Compare similar products

PopMarket - Maschinen Krieger - ARTPLA - H.A.F.S Gladiator Late Production 1/35 Scale Model Kit (set of 2) - COLLECTIBLES - Multicolor
PopMarket - Maschinen Krieger - ARTPLA - H.A.F.S Gladiator Late Production 1/35 Scale Model Kit (set of 2) - COLLECTIBLES - Multicolor

From Maschinen Krieger comes the new 1/35 scale Gladiator, a large, four-legged mecha with a heavily armored combat suit! The popular Gladiator from InchMa.K.Inch (Maschinen Krieger) is now available as a 1/35 scale plastic model kit. This captivating kit combines the exquisite curves and mechanical details of Akira Tani's sculpt. By swapping parts, you can recreate the hatch open position. Each joint can be set to one of three different angles. One decal sheet with new markings is included. Scale 1/35, Overall height approx. 135mm Molding color 2 colors (olive drab, blue gray) Prototype Production Taniaki Nuber of Runners 8 in total + 1 decal This product is a plastic model that requires assembly. Plastic model adhesive is required for assembly. The images shown are development samples and may differ slightly from the actual product. Thank you for your understanding.

PopMarket - Kotobukiya - Hexa Gear - Lord Impulse - COLLECTIBLES - Multicolor

Combat preparation complete. Start your engines. Lord Impulse is a third generation Hexa Gear developed by Earthcline Biomechanics. It is a high grade mass produced predecessor model of Rayblade Impulse. Despite some parts and the frame being the same, Lord Impulse remains an outstanding, universally adaptable machine. Earthcline Biomechanics was originally developing Voltrex and Lord Impulse simultaneously but the factory producing Voltrex was taken over after SANAT’s seizure of MSG. Earthcline Biomechanics was originally developing Voltrex and Lord Impulse simultaneously but the factory producing Voltrex was taken over after SANAT’s seizure of MSG. Lord Impulse was adjusted to account for some of its shortcomings due to this change from two machines to one, including a larger magazine for the chain gun and automatic grenade launcher, as well as the addition of the trick blade, which will be further explained below. However, despite these additions, it is widely acknowledged that Lord Impulse lacks in firepower and is usually seen with additional weapons in battle. In response to these customizations, an order was given to avoid over-arming the machine, since it would lessen its qualities as a third generation Hexa Gear and be a hindrance to its troops in battle. The articulated thrusters installed on either side of the front of the machine are not intended for acceleration, but rather as instant attitude control in the air while jumping. The “trick blade” that extends from the back of the machine is a multi-jointed mechanical arm. The tip of the arm is equipped with an adjustable claw. This weapon can be used as a fifth arm in close quarters combat, tearing enemy Governors from machines when passing by at high speed. The arm can also hold firearms or melee weapons. With the trick blade’s sturdy construction under the Zoatex control system, the weapon becom

PopMarket - Girls und Panzer - ARTPLA - Last Chapter Garage Plastic Model Kit Set A - COLLECTIBLES - Multicolor

From Girls und Panzer, a plastic model kit featuring Miho Nishizumi and Yukari Akiyama, along with accessory parts, is now available! From Girls und Panzer, a plastic model kit has been released that allows you to recreate the characters of the Anglerfish Team and the scene of the tank warehouse! The first Garage Set [A] features two characters, Miho Nishizumi and Yukari Akiyama! In addition to facial parts for applying decals, it also comes with pre-printed parts. It also comes with a wide variety of accessory parts! This lineup includes versatile items inspired by the scene of the first visit to the tank warehouse in the first episode of the TV anime. Includes 5 runners Miho Nishizumi Yukari Akiyama Cat Work desk Ladder Scrap wood Brick wall 2 wooden boxes 2 drums 2 gas cylinders 2 18L cans 2 deck brushes Enjoy combining it with the second Garage Set [B], scheduled for at a later date. Scale 1/24 anime scale Materials HIPS Molding color Pale orange, Dark brown, Dark green Prototype production Takehiko Ogami, Honami Mizuta, Ayami Nakai The images shown are development samples and may differ slightly from the actual product. Thank you for your understanding.

PopMarket - Patlabor 2: The Movie - ARTPLA - Ingram Reactive Armor #1 1/35 Scale Model Kit - COLLECTIBLES - Multicolor

The Ingram Unit 1 equipped with reactive armor is now available in ARTPLA in a large 1/35 scale! This high-resolution plastic model incorporates the design by Yutaka Izubuchi! From Mobile Police Patlabor 2 the Movie, Ingram Unit 1 equipped with reactive armor joins the ARTPLA lineup! This fixed-pose plastic model kit features Ingram, designed by illustrator Yutaka Izubuchi, in poses and proportions that make it look as powerful and beautiful as possible. It's packed with highlights, including the organically shaped reactive armor that conveys texture, and the head and neck made of flowing surfaces. While the surface shape of the parts is delicate, the thick molding allows for sturdy assembly. The molding color is pearl gray, which beautifully accentuates the unevenness of the model. Units 2 and 3 are also currently in production! Create a spectacular display of all three units. Scale 1/35, Approximately 23cm tall when completed Molding color 1 color (pearl gray) Number of Runners 8 runners + 1 decal Prototype production Kazuya Kira This product is a plastic model kit that requires assembly. Plastic model adhesive is required for assembly. The images shown are development samples and may differ slightly from the actual product. Thank you for your understanding.

Specs

Be the first to ask a question.

We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.

No content
Sponsored