PowerBass 3XL-1210D 12" Subwoofer, Dual 1-Ohm, 1000 wRMS The 3XL series have been designed to withstand the extreme heat that the new generation Class “D” amplifiers create. Class “D” amplifiers heat up the woofers voice coil two to three times hotter and faster than a conventional class A/B amplifier. This calls for Xtreme measures and special parts to classify these as a true “Class D Subwoofer”. But hey, this is PowerBass. PowerBass has it under control. First, PowerBass uses industrial assembly glues that are made in the USA that handle this excessive heat that would normally tear a conventional subwoofer apart. Then there is perimeter venting to allow air movement over the voice coil built into our custom cut, cast aluminum basket. The basket works as a strong foundation for our heavy duty non-pressed raw pulp paper cone and redesigned inverted PBX dust cap. Features - • New PBX logo dust cap • 12" Dual 1-Ohm Subwoofer • 1000 watt RMS/2000 Watts Max • DDC Pressed Paper Cone • High Roll Nitrile Butadine Rubber (NBR) Surround • 3” Vented HD BASV Voice Coil Former • Perimeter Aero-Vent Voice Coil Cooling Vents • Non Resonance DDC Coated Cast Aluminum Basket • XTRA XTRA XTRA Large Triple Stacked Motor Structure • Square Spring Loaded Nickel Plated Push Terminals • Optimally Designed for Ported Enclosures Specifications - • Nominal Impedance: Dual 1-ohm • BL: 14.06 • Subwoofer Frequency Range: 25 Hz - 450 Hz • Voice Coil Size: 3 in • Material: Pressed and Coated Pulp Paper • Magnet Size: 228.46 oz • Sensitivity (1W / 1M): 89 dB • Motor Structure: 228.46 oz • Cutout Diameter: 11.06 in (282mm) • Mounting Depth: 9.1 in • Xmax: 19 mm • Spl: 89 dB • No: 0.175% • Qts: 0.577 • Qes: 0.639 • Qms: 5.932 • Mms: 308.79 g • Cms: 65 uM/N • Vas: 26.00 Ltr • SD: 530.9 sqCM • Fs: 35.5 Hz • Test Impedance: 1.83-ohms • VC Impedance: 1-ohm + 1-ohm • Size: 12 in • Sensitivity: 89 dB • Frequency Response: 25 Hz - 450 Hz • Voice Coil Size: 3 in

PowerBass 3XL-1210D 12" Subwoofer, Dual 1-Ohm, 1000 wRMS The 3XL series have been designed to withstand the extreme heat that the new generation Class “D” amplifiers create. Class “D” amplifiers heat up the woofers voice coil two to three times hotter and faster than a conventional class A/B amplifier. This calls for Xtreme measures and special parts to classify these as a true “Class D Subwoofer”. But hey, this is PowerBass. PowerBass has it under control. First, PowerBass uses industrial assembly glues that are made in the USA that handle this excessive heat that would normally tear a conventional subwoofer apart. Then there is perimeter venting to allow air movement over the voice coil built into our custom cut, cast aluminum basket. The basket works as a strong foundation for our heavy duty non-pressed raw pulp paper cone and redesigned inverted PBX dust cap. Features - • New PBX logo dust cap • 12" Dual 1-Ohm Subwoofer • 1000 watt RMS/2000 Watts Max • DDC Pressed Paper Cone • High Roll Nitrile Butadine Rubber (NBR) Surround • 3” Vented HD BASV Voice Coil Former • Perimeter Aero-Vent Voice Coil Cooling Vents • Non Resonance DDC Coated Cast Aluminum Basket • XTRA XTRA XTRA Large Triple Stacked Motor Structure • Square Spring Loaded Nickel Plated Push Terminals • Optimally Designed for Ported Enclosures Specifications - • Nominal Impedance: Dual 1-ohm • BL: 14.06 • Subwoofer Frequency Range: 25 Hz - 450 Hz • Voice Coil Size: 3 in • Material: Pressed and Coated Pulp Paper • Magnet Size: 228.46 oz • Sensitivity (1W / 1M): 89 dB • Motor Structure: 228.46 oz • Cutout Diameter: 11.06 in (282mm) • Mounting Depth: 9.1 in • Xmax: 19 mm • Spl: 89 dB • No: 0.175% • Qts: 0.577 • Qes: 0.639 • Qms: 5.932 • Mms: 308.79 g • Cms: 65 uM/N • Vas: 26.00 Ltr • SD: 530.9 sqCM • Fs: 35.5 Hz • Test Impedance: 1.83-ohms • VC Impedance: 1-ohm + 1-ohm • Size: 12 in • Sensitivity: 89 dB • Frequency Response: 25 Hz - 450 Hz • Voice Coil Size: 3 in

Enhance your car's audio system with this 12-inch Kenwood subwoofer. It produces booming bass at a maximum level of 1000W, and its frequency response range of 36-300Hz lets you hear pulsating low notes. This single voice coil Kenwood subwoofer has ready-push terminals, so you can quickly set up your wiring configuration. Geek Squad Installation Recommended Visit your local Best Buy store for more information.

SUPERIOR BASS PERFORMANCE Featuring the revolutionary Alpine HAMR (High Amplitude Multi-Roll) Surround technology, this subwoofer ensures maximum excursion (20mm Linear Excursion) and performance without compromising on sound quality. The carbon fiber dust cap and pulp-mica cone body are meticulously crafted to deliver durability and crystal-clear bass, even at high volumes. POWER & PRECISION Power through your tracks with the robust 800W RMS (2400W peak) power handling. Coupled with triple-stacked high power strontium ferrite magnets, this subwoofer ensures impeccable control and responsiveness, delivering deep, resonating bass for a truly immersive listening experience. SLEEK DESIGN, LASTING DURABILITY Engineered with a cast aluminum frame and premium aluminum trim ring, every detail is crafted to merge style with endurance. The addition of an open mesh style protective grille not only enhances its durability but also ensures your subwoofer remains safeguarded without compromising appearance. THE ALPINE STATUS DIFFERENCE Join the elite group of audio enthusiasts who settle for nothing but the best. Whether it's the advanced engineering ensuring consistent, reliable performance, or the sleek design that enhances your car's interior, the Alpine Status subwoofer allows your passion for pure sound to be fulfilled. FEATURES Carbon Fiber Dust Cap w/Pulp-Mica Cone Body Triple-Stacked High Power Strontium Ferrite Magnets High Amplitude Multi-Roll (HAMR) Surround Dual Progressive Spiders w/Integrated Tinsel Leads Cast Aluminum Frame w/Premium Aluminum Trim Ring Compound Radius Curve Extended Pole Geometry 20mm of Linear Excursion TECH SPECS Dimensions: 12-7/8" x 12-7/8" x 9-2/8" Mounting Depth: 7-3/8" Frequency Response: 24Hz-200Hz Power Range: 400W-800W RMS Power Handling: 800W RMS / 2400W Peak Magnet Weight: 174oz (x3) Voice Coil: 65.5mm (2.6") Linear Excursion: 20mm

Keep your music thumping with this 12-inch Kicker Solo-Baric subwoofer. It has a 750W RMS rating for continuous pounding bass, and the vented enclosure has heavy internal bracing to minimize vibration while producing a strong, full sound. This Kicker Solo-Baric subwoofer has a single 2 ohm terminal for quick installation and setup. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
| Pros for Powerbass - 3XL-1210D - 12" Dual 1-Ohm Subwoofer - Black/Gray | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality, Bass, Price, Power Handling, Durability | There were no pros for this product— | Sound Quality, Bass, Power, Size, Ease of use |
| Cons for Powerbass - 3XL-1210D - 12" Dual 1-Ohm Subwoofer - Black/Gray | |||
| There were no cons for this product— | Voice Coil | There were no cons for this product— | Weight |
This product doesn't have any reviews yet.