Powerbass - XMA-4250IR - 250 Watt x 4 @ 2-Ohm Full Range Digital Amplifier - Black/Gray

The XL series was developed for the growing Power Sports market including UTV and Marine applications, where electronics must withstand harsh damp environments. The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures. Features: 800 Watt High Efficiency Full-Range Class D Design 2-OHM Stable Stereo Amplifier International Rectifier® Chip Set Ultra Low Current Draw Double Sided Copper Plated PCB Conformal Coated PC Board PWM MOSFET Power Supply Digital Sound Optimization Circuitry High Damping Control Circuit High Current Voltage Ripple Rejection Circuitry 3.5mm AUX Input Remote Soft Delay Turn On/Off Circuit Variable Low/High Pass Electronic Crossover Variable 12dB Bass Boost EQ Variable Gain Control Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Specifications Peak Power: 1600 watts Subwoofer Frequency Range: 10 Hz - 400Hz Power Supply: Unregulated PWM Inputs: RCA (speaker level compatible)/3.5mm Mini Jack Input Dimensions (in Inches): 9.6" x 4.5" x 1.6" Depth: 9.6" Channels (mono): 4 4-ohm Power: 100 watts x 4 4-ohm Mono Power: 400 watts x 2 2-ohm Power: 200 watts x 4 1-ohm Mono Power: N/A Selectable Subwoofer EQ: 0-18d B Gain @ 45Hz, Rear Ch. Variable Subsonic Freq: N/A Equalization Boost/Cut: 0 - 18 dB Height: 1.6" Width: 4.5" Subwoofer EQ Frequency: 45 Hz Low-Pass Crossover Freq: 40 Hz - 400 Hz High-Pass Crossover Freq: 40 Hz - 400 Hz Crossover Slope: 12 dB Input Sensitivity: 0.25 V - 10.0 V S/N Ratio: >85 dB Total Harmonic Distortion: 0.04% at Rated Power Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 100 watts x 4 Output Power (14.4 V) @ 2 ohm: 200 watts x 4 Output Power (14.4 V) @ 1 ohm: N/A Frequency Response: 10 Hz - 40 kHz

The PowerBass PBX Series Amplifiers are the cleanest most efficent amplifiers we have built to date, with attention to sonic accurracy, clarity, and a bold use of efficient power, this series is guaranteed to have smiling with pure musical enjoyment. PBX Ultra High Efficiency Amplifiers are the result of extensive engineering and testing to develop the best sounding and most efficient power delivery we have ever produced. With the success of our previous XMA series our engineers went to work on the PBX Series with the goal of creating true works of art featuring high quality parts and an ultra efficient circuit design proving to be some of the best Class D amplifiers on the market today. The PBX Series represents the very latest in Class D Technology. IR, a leader in PWM circuit design, has worked in conjuction with PowerBass engineers to produce more stable power output, minimal RF interference and improved sound quality. Available in Full-Range Digital 4CH, 6CH, and 5CH models as well as D-Class Mono Blocks from 800W to an astounding 3000W RMS the PBX Series has the power and channel configurations to meet the demands of the most demanding setups. Specifications - • Peak Power: 1000 watts • Subwoofer Frequency Range: 10 Hz - 250 Hz • Dimensions (in Inches): 11.25x7x2.25 • Depth: 11.25 • Channels (mono): 4 • 4-ohm Power: 125 watts x 4 • 4-ohm Mono Power: 500 watts x 2 • 2-ohm Power: 250 watts x 4 • 1-ohm Mono Power: N/A • Variable Subsonic Freq: N/A • Height: 2.25 • Width: 7 • Low-Pass Crossover Freq: 25 Hz - 250 Hz • High-Pass Crossover Freq: 50 Hz - 350 Hz • Crossover Slope: 12 dB • Input Sensitivity: 0.25 V - 10.0 V • S/N Ratio: >90 dB • Strapped Output Power @ 2ohms: N/A • Output Power (14.4 V) @ 4 ohm: 125 watts x 4 • Output Power (14.4 V) @ 2 ohm: 250 watts x 4 • Output Power (14.4 V) @ 1 ohm: N/A • Frequency Response: 10 Hz - 40 kHz

PowerBass XMA-2405IR 2ch 800 Watt Compact Amplifier The XMA amplifiers carry on the tradition of looking good and sounding great while taking up less space than any other amplifier we have ever offered – and smaller than most amps available from the majority of our competitors’ at the same output levels. High efficiency FRD (Full Range Digital) technology allows these amplifiers to operate at well over 85% efficiency. Limited space no longer means sacrificing great sound with the new PowerBass XMA Amplifiers. Features - • 800 Watt High Efficiency Full-Range Class D Design • 2-OHM Stable Stereo Amplifier • Ultra Low Current Draw • Double Sided Copper Plated PCB • PWM MOSFET Power Supply • Digital Sound Optimization Circuitry • High Damping Control Circuit • Variable Subsonic Filter • High Current Voltage Ripple Rejection Circuitry • Balanced RCA Inputs • Auto Turn On/Off • Remote Soft Delay Turn On/Off Circuit • 40 Click Variable Detente High/Low Pass Electronic Crossover • Switchable 0/12/18 dB Bass Boost @ 45 Hz • Variable Gain Control • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output Specifications - • Inputs: RCA (speaker level compatible) • Subwoofer Frequency Range: 10 Hz - 250 Hz • Switchable Subwoofer EQ: 0 / +12 / +18dB @ 45 Hz • 4-ohm Mono Power: 800 watts x 2 • 4-ohm Power: 200 watts x 4 • 2-ohm Power: 400 watts x 4 • Subwoofer EQ Frequency: 45 Hz • Low-Pass Crossover Freq: 25 Hz - 250 Hz • High-Pass Crossover Freq: 50 Hz - 350 Hz • Peak Power: 1600 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 9.2" x 7.1" x 2.0" • Input Sensitivity: 0.25 V - 10.0 V • S/N Ratio: >90 dB • Total Harmonic Distortion: 0.04% at Rated Power • Output Power (14.4 V) @ 4 ohm: 200 watts x 4 • Output Power (14.4 V) @ 2 ohm: 400 watts x 4 • Channels (mono): 2 • Frequency Response: 10 Hz - 40 kHz