sE Electronics sE7. A compact & classy condenser. The sE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond. Product Highlights: Optimized acoustic design, discrete class-A circuitry and a transformerless output. Clear, natural sound quality at all frequencies. Switchable -20dB attenuation pad. High sound pressure level (SPL) handling capability. Switchable low-cut 80 Hz filter. Extremely low-noise components. Product Features: sE7 Matched Pair. Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings. High-quality Condenser Capsule. The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. The Quietest Pencil Mic in Its Class. With a very short signal path and state-of-the-art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth. Switchable Pre-attenuation pad. The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums. Switchable Low-cut Filter. The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques. Built Like a Tank. The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the gold-plated XLR connector ensures a loss-free, reliable signal for years of demanding use. Recommended Use. Acoustic guitar, choir, orchestral + strings, piano, woodwinds, drums, percussion, cymbals / OH. Product Specifications: Components. Capsule: 1 / 2" Back-electret condenser capsule. Power. Electrical Impedance: <200 Ohms. Recommended Load Impedance: >1k Ohms. Connectivity: 3-pin male XLR connector. Powering: 48V Phantom Power (P48 according to IEC 61938). Sound. Polar Patterns: Cardioid. Frequency Range: 20 Hz - 20 kHz. Sensitivity: 19 mV / Pa (-35 dBV). Max SPL: 136 / 156 dB (0 / 20 dB attenuation pad). Equivalent Noise Level: 16 dB. Dynamic Range: 120 / 140 dB (0 / 20 dB attenuation pad). Signal to Noise Ratio: 78 dB. Low-cut Filter: 80 Hz, 6 dB / Oct, switchable. Attenuation Pad: 20 dB, switchable. Current Consumption: 3.0 mA. Dimensions. Mic Diameter: 23 mm (0.91 in.). Mic Length: 120 mm (4.72 in.). Mic Weight: 128 g (4.52 oz.)

• Switchable Pre-attenuation pad: The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums.