SounDigital - Refurbished Excellent - XP 1000.1 Monoblock 1000 watt RMS at 1 Ohm Amplifier - Black
Reviews coming soon
About this product
SounDigital XP 1000.1 Monoblock 1000 watt RMS at 1 Ohm Amplifier
Features
General Features:
Power @ 4Ω: 1 X 476 WRMS Power @ 2Ω: 1 X 721 WRMS Power @ 1Ω: 1 X 1000 WRMS Operating Voltage: 9V – 16V
High Quality Sound:
Current Draw (Music): 43 A Current Draw (Max): 86 A Recommended Fuse (Music): 50 A Frequency Response (-3dB): 5Hz – 25kHz SNR: 94dB Crossover HPF: 5Hz – 40Hz Crossover LPF: 50Hz – 500Hz
Specifications
- Amplifier ClassDNumber Of Channels4Bass BoostNone
Reviews
This product doesn't have any reviews yet.
Compare similar products

SounDigital XP 1000.1 Monoblock 1000 watt RMS at 1 Ohm Amplifier

The SOUNDSTORM Evolution EV2.200 Amplifier is a 2 channel, 200-watt car amp that packs a punch for a really reasonable price.This amp is Class A/B with specific linear circuitry that increases sound quality and power output while reducing distortion. The total harmonic distortion is only 0.01%. The Evolution is 2 ohms stable and produces more power and volume. The high and low-level inputs and variable gain control let you customize your sound with any speaker or audio system.Variable Gain Control lets you balance the amp's output with the speakers or subs the amp is driving. Too much gain will lead to distortion and too little will lead to clipping.Really rock out to the music in your car with the SOUNDSTORM Evolution EV2.200 Amplifier.

Borrowing from Powerbass's former ACS series, these new amplifiers offer upgraded features, terminals and a dual layer PCB all packed in the most compact chassis allowable. To accomplish this they selected SMD parts and engineered a brand new high density heat sink engineered for maximum efficiency and cooling. The result, an all new line-up of two, four, five and mono channel models that offer amazing performance and fantastic value. Ultra efficient, the PB Series amplifiers produce plenty of low distortion high fidelity audio in a footprint small enough to fit nicely in nearly any vehicle. The PB Series Amplifiers provide the perfect mix of performance and style in a sleek new compact chassis. Features: 1,000 Watt High Efficiency Class D Design 1-OHM Stable Mono Block Amplifier MOSFET Power Supply High Level (Speaker)/Low Level (RCA) Input Remote Soft Delay Turn On/Off Circuit Variable Low Pass Electronic Crossover Selectable 12dB Bass Boost EQ Variable Gain Control Remote Level Control Port (for optional PB-GAIN1 controller) Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Specifications: Peak Power: 2000 watts Power Supply: Unregulated PWM Inputs: RCA, 1 Pair Input, 1 Pair Speaker Level Input Dimensions (in Inches): 12.0" x 7.1" x 2.0" Depth: 12.0" Channels (mono): 1 Variable Subsonic Freq: Variable 15 Hz - 50 Hz Equalization Boost/Cut: Switchable 0/12 dB @ 45Hz Height: 2.0" Width: 7.1" Switchable Subwoofer EQ: 0 / +12 dB @ 45 Hz Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: Switchable 0/+12 dB Low-Pass Crossover Freq: Variable 30 Hz - 250 Hz High-Pass Crossover Freq: N/A Crossover Slope: 12 dB Input Sensitivity: 0.25 V - 6.0 V S/N Ratio: >90 dB Total Harmonic Distortion: 0.5% @ 1,000 watts Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 400 watts x 1 Output Power (14.4 V) @ 2 ohm: 600 watts x 1 Output Power (14.4 V) @ 1 ohm: 1000 watts x 1 Frequency Response: 10 Hz - 250 Hz

The XL series was developed for the growing Power Sports market including UTV and Marine applications, where electronics must withstand harsh damp environments. The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures. Features: 800 Watt High Efficiency Full-Range Class D Design 2-OHM Stable Stereo Amplifier International Rectifier® Chip Set Ultra Low Current Draw Double Sided Copper Plated PCB Conformal Coated PC Board PWM MOSFET Power Supply Digital Sound Optimization Circuitry High Damping Control Circuit High Current Voltage Ripple Rejection Circuitry 3.5mm AUX Input Remote Soft Delay Turn On/Off Circuit Variable Low/High Pass Electronic Crossover Variable 12dB Bass Boost EQ Variable Gain Control Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Specifications Peak Power: 1600 watts Subwoofer Frequency Range: 10 Hz - 400Hz Power Supply: Unregulated PWM Inputs: RCA (speaker level compatible)/3.5mm Mini Jack Input Dimensions (in Inches): 9.6" x 4.5" x 1.6" Depth: 9.6" Channels (mono): 4 4-ohm Power: 100 watts x 4 4-ohm Mono Power: 400 watts x 2 2-ohm Power: 200 watts x 4 1-ohm Mono Power: N/A Selectable Subwoofer EQ: 0-18d B Gain @ 45Hz, Rear Ch. Variable Subsonic Freq: N/A Equalization Boost/Cut: 0 - 18 dB Height: 1.6" Width: 4.5" Subwoofer EQ Frequency: 45 Hz Low-Pass Crossover Freq: 40 Hz - 400 Hz High-Pass Crossover Freq: 40 Hz - 400 Hz Crossover Slope: 12 dB Input Sensitivity: 0.25 V - 10.0 V S/N Ratio: >85 dB Total Harmonic Distortion: 0.04% at Rated Power Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 100 watts x 4 Output Power (14.4 V) @ 2 ohm: 200 watts x 4 Output Power (14.4 V) @ 1 ohm: N/A Frequency Response: 10 Hz - 40 kHz
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.









































