Startech - 1m Multimode 50/125 Duplex Fiber Patch Cable LC - LC

Need a OM3 optical fiber cable from a LC port to a ST port? This Cable Leader OM3 LC to ST fiber optic patch cable, also sold as a LC to ST multimode fiber optic cable, fiber optic network cable or patch cord, uses Corning 50/125 OM3 glass in a 2.0 mm OFNR riser-rated zipcord with a duplex LC/UPC connector on one end and two ST/UPC bayonet connectors with zinc hoods on the other, insertion loss 0.30 dB or less and return loss 35 dB or better. OM3 fiber is specified by TIA-492AAAC at 2000 MHz-km effective modal bandwidth, which carries 10GBASE-SR up to 300 m and 25GBASE-SR up to 70 m under IEEE 802.3. Works with 10GBASE-SR and 1000BASE-SX multimode optics and equipment from Cisco, Ubiquiti UniFi, MikroTik, TP-Link, Netgear, TRENDnet, StarTech, Dell and HPE Aruba. Each cable is sample-tested during production, and Cable Leader handles replacement requests directly. Best for: 10G links between LC and ST gear, patch panels, media converters. Not for: LR or LX single-mode optics on yellow OS2 cable, green APC ports, or Toslink audio.

Need to link a 10G SFP+ switch port, server NIC or patch panel over multimode fiber? This Cable Leader OM3 LC to LC fiber patch cable, also sold as an OM3 duplex fiber optic cable or multimode patch cord, uses Corning 50/125 OM3 glass with a 2.0 mm zipcord OFNR riser-rated jacket and LC/UPC connectors on both ends, with insertion loss of 0.30 dB or less and return loss of 35 dB or better per connector. OM3 fiber is specified by TIA-492AAAC at 2000 MHz-km effective modal bandwidth, which carries 10GBASE-SR up to 300 m and 25GBASE-SR up to 70 m under IEEE 802.3. Compatible with 10GBASE-SR and 1000BASE-SX LC transceivers from Cisco, Ubiquiti UniFi, MikroTik, TP-Link, Netgear, Dell, HPE Aruba and Intel X520 or X710 network cards, plus LC duplex patch panels and couplers. Each cable is sample-tested during production, and Cable Leader handles replacement requests directly. Best for: 10G SFP+ uplinks inside a rack or room, server to switch links, LC patch panel jumpers. Not for: single-mode LR or LX transceivers that need yellow OS2 fiber, QSFP MPO parallel ports, or Toslink audio.

Need a OS2 optical fiber cable from a LC port to a ST port? This Cable Leader OS2 LC to ST fiber optic patch cable, also sold as a LC to ST single mode fiber optic cable, fiber optic network cable or patch cord, uses Corning 9/125 OS2 glass in a 2.0 mm LSZH/OFNR riser-rated zipcord with a duplex LC/UPC connector on one end and two ST/UPC bayonet connectors with zinc hoods on the other with a 19.5 mm short-boot LC, insertion loss 0.30 dB or less and return loss 55 dB or better. OS2 single mode optical fiber in the G657A1 bend-insensitive grade carries 1000BASE-LX and 10GBASE-LR links up to 10 km under IEEE 802.3 and works with existing G652D plant. Works with 10GBASE-LR and 1000BASE-LX single mode optics and equipment from Cisco, Ubiquiti UniFi, MikroTik, TP-Link, Netgear, TRENDnet, StarTech, Dell and HPE Aruba. Each cable is sample-tested during production, and Cable Leader handles replacement requests directly. Best for: 10G LR links between LC and ST gear, patch panels, media converters. Not for: SR or SX multimode optics on aqua OM3 or OM4 cable, green APC ports, or Toslink audio.