Startech - 30ft CAT6a Ethernet Cable
Reviews coming soon
About this product
This 30ft CAT6a Ethernet cable features a Low Smoke Zero Halogen (LSZH) jacket and supports multi-gigabit connections up to 10Gbps. It is designed with shielded RJ45 connectors and is ETL verified for compliance with industry standards. The cable is made from 100% stranded copper wire, ensuring reliable data transmission and power delivery for PoE devices.
Cable Length
30'Features
High-Performance Ethernet Cable
Supports error-free 1/2.5/5/10Gbps multi-gigabit connections with low Near-End Crosstalk (NEXT) and Return Loss (RL).
Shielded Design
Improves signal integrity and protects against noise and electromagnetic interference with individually twisted pairs wrapped in foil.
100W Power Over Ethernet
Delivers stable PoE power to devices up to 100W, compliant with IEEE 802.3bt standards.
Durable LSZH Jacket
PVC-free, Low Smoke Zero Halogen jacket produces less corrosive smoke, enhancing safety in case of fire.
ETL Verified
Meets ANSI/TIA-568.2-D standards, ensuring reliable performance for high-speed applications.
Specifications
- Cable Length30 feetNetworking Cable TypeCat 6aConnector Type (End 1)RJ45Connector Type (End 2)RJ45
Reviews
This product doesn't have any reviews yet.
Compare similar products

This 30ft CAT6a Ethernet cable features a Low Smoke Zero Halogen (LSZH) jacket and supports multi-gigabit connections up to 10Gbps. It is designed with shielded RJ45 connectors and is ETL verified for compliance with industry standards. The cable is made from 100% stranded copper wire, ensuring reliable data transmission and power delivery for PoE devices.

This Cat6 Ethernet Cable is an RJ45 male-to-male network patch cord for connecting computers and LAN devices to routers, modems, switches, hubs, patch panels, servers, printers, smart TVs, game consoles, NAS systems, and network media players. The cable supports bandwidth up to 550MHz and data rates up to 10Gbps on compatible Ethernet networks. Four unshielded twisted pairs help reduce crosstalk, while gold-plated 8P8C RJ45 contacts support stable signal transmission. Stranded copper-clad aluminum conductors, a flexible PVC jacket, molded strain relief, and snagless boots provide dependable everyday connectivity and help protect the retaining clips during installation. Technical Specifications:- Product Type: Cat6 Ethernet patch cable- Connector A: RJ45 male- Connector B: RJ45 male- Connector Type: 8P8C- Network Category: Cat6- Bandwidth: Up to 550MHz- Data Rate: Up to 10Gbps- Construction: UTP, 4 twisted pairs- Conductors: Stranded CCA- Connector Contacts: Gold-plated- Jacket: Flexible PVC- Boot: Molded snagless strain relief- Compatibility: Cat6, Cat5e and Cat5 networks- Standard: Meets or exceeds TIA/EIA-568-C.2- Warranty: Lifetime warranty Typical Applications: computer networking, router and modem connections, switches, hubs, servers, printers, gaming consoles, smart TVs, NAS devices, VoIP phones, network media players, patch panels, and office or home LAN setups

The Sanoxy 30m OM4 LC to LC Duplex 50/125 Multimode Fiber Patch Cable is a 30 m multimode fiber optic patch cable built for high-bandwidth, low-latency links between switches, servers, media converters, and patch panels. It uses OM4-grade fiber with a 50/125 micron core and cladding construction, which helps keep signal loss low across the run and supports the data rates commonly used in structured cabling and data-center environments. The ceramic-ferrule connectors are precision polished and protected by dust caps, while the duplex zipcord jacket stays flexible enough to route through trays, conduit, and rack channels without stressing the fiber. It is compatible with standard fiber transceivers, SFP and SFP+ modules, media converters, fiber patch panels, fiber network cards, and switch uplink ports that use the same connector type and fiber grade. Because fiber carries an optical rather than electrical signal, it suits long runs, building-to-building links, and installations where electrical isolation and interference immunity matter. Please review your device's port type and required length before ordering to confirm the correct fit for your setup.

IThe Vericom CAT-6 U/UTP Solid Riser CMR Cable supports 10GBASE-T Ethernet based on limited distances per the standard, 1000BASE-T (Gigabit Ethernet), 100BASE-T (Fast Ethernet), 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM, Digital video and broadband/baseband analog video, Voice over Internet Protocol (VoIP). Category 6 is backwards compatible with Category 5e systems as well as IEEE 802.3af/802.3at and 802.3bt for PoE applications. The riser cable is designed to meet and exceed ANSI/TIA-568.2-D Category 6 and ISO 11801 Class E electrical performance requirements for frequencies up to 250 MHz. The 1,000-ft. of Yellow cable in its handy pull box is constructed with 23 AWG solid conductors in a 4 pair configuration, separated with an integral cross filler to reduce crosstalk to provide maximum system performance. Vericom Category 6 CMR Cable has a nominal cable diameter of 0.228” (5.8 mm) and is is rated for multi-level non-plenum spaces.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.












































