StarTech.com - 4.6m(15ft) CAT6 Ethernet Cable - LSZH (Low Smoke Zero Halogen) - 10 Gigabit 250Mhz 100W PoE RJ45 UTP Network Patch Cord

This Cat6 Ethernet Cable is an RJ45 male-to-male network patch cord for connecting computers and LAN devices to routers, modems, switches, hubs, patch panels, servers, printers, smart TVs, game consoles, NAS systems, and network media players. The cable supports bandwidth up to 550MHz and data rates up to 10Gbps on compatible Ethernet networks. Four unshielded twisted pairs help reduce crosstalk, while gold-plated 8P8C RJ45 contacts support stable signal transmission. Stranded copper-clad aluminum conductors, a flexible PVC jacket, molded strain relief, and snagless boots provide dependable everyday connectivity and help protect the retaining clips during installation. Technical Specifications:- Product Type: Cat6 Ethernet patch cable- Connector A: RJ45 male- Connector B: RJ45 male- Connector Type: 8P8C- Network Category: Cat6- Bandwidth: Up to 550MHz- Data Rate: Up to 10Gbps- Construction: UTP, 4 twisted pairs- Conductors: Stranded CCA- Connector Contacts: Gold-plated- Jacket: Flexible PVC- Boot: Molded snagless strain relief- Compatibility: Cat6, Cat5e and Cat5 networks- Standard: Meets or exceeds TIA/EIA-568-C.2- Warranty: Lifetime warranty Typical Applications: computer networking, router and modem connections, switches, hubs, servers, printers, gaming consoles, smart TVs, NAS devices, VoIP phones, network media players, patch panels, and office or home LAN setups

This Cat 6a shielded Ethernet patch cable - also sold as a Cat6a LAN cable, internet cable or RJ45 network cord - carries high speed 10 Gigabit Ethernet across the full 100 m the standard allows, over a 24 AWG stranded bare copper core rated to 500 MHz. An F/UTP foil screen surrounds all four twisted pairs, which is what lets Cat6a hold 10GBASE-T at distance where an unshielded cable gives alien crosstalk room to build. Each RJ45 plug uses 50-micron gold-plated contacts wired to T568B, and a snagless molded boot protects the locking tab inside a dense patch field. Backward compatible with Cat 5e and Cat6 ports, so it can go in ahead of the switch upgrade. Compatible with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP equipment. Stocked in 1, 3, 5, 7, 10ft, 14, 15, 25, 50, 75 and 100 ft - short jumpers through long Ethernet cables between racks. Measure the path the cable travels, not the straight line. Best for: 10 Gigabit uplinks, server rooms and patch panels. Not for: in-wall runs or outdoors.

Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 5e Ethernet patch cable, also sold as a Cat5e LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper rated to 350 MHz, well above the 100 MHz the Cat 5e standard requires, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 1 ft to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.