Thermal Grizzly - TG-GG-01 TG GPU Guard Gasket for RTX 4090/5080/5090 Highly Compressible, Protection, 9‑Piece

The phase-change material on which the PhaseSheet PTM is based is solid at room temperature. The material only begins to liquefy at temperatures above 45 degrees Celsius. A high contact pressure of around 300-400N is required for optimum distribution of the liquid PhaseSheet PTM and thus the lowest possible layer thickness. PhaseSheet PTM has a very low viscosity in its liquid state and contracts again when it changes to a solid material, thus minimizing the pump-out effect. The pump-out effect is particularly pronounced when combining a copper cooler on a graphics chip because silicon and copper have different linear expansion when heated. The temperatures under load cause the heatspreader and the base plate to deform (concave or convex) and return to their original shape (straight) when they cool down. As a result, the thermal paste is slowly pressed out between the heatspreader and the base plate of the CPU cooler, for example. Outstanding thermal conductivity consistently high performance Very long service life Versatile in application Not electrically conductive Easy to use PhaseSheet PTM is more durable than traditional thermal pastes, but not as durable as KryoSheet, for example, which is virtually maintenance-free. PhaseSheet PTM develops and stabilizes its maximum thermal conductivity after around ten thermal cycles above 60 degrees Celsius. Scope of Delivery 1x PhaseSheet PTM

Kryonaut extreme was developed to meet the highest demands in extreme overclocking. With ultra-fine particles and optimized layer thickness, the paste maximizes thermal conductivity, making it perfect for setups using liquid nitrogen or water cooling systems. With added nano-aluminum oxide particles, Kryonaut Extreme fills even the smallest irregularities to effectively dissipate heat. It remains stable and does not cure even at extreme temperatures, ensuring your system stays safely and powerfully cooled at all times. TG Cleaning Wipes are cleaning cloths for cleaning surfaces so that thermal conductive materials such as thermal pastes or liquid metal can adhere well and thus develop their full thermal conductivity. Assembly aids such as the TG Kapton Insulation Sheet or the TG Shield protective coating also adhere better to cleaned surfaces. TG Cleaning Wipes are packaged as a practical complete set of 20 cleaning cloths

Arctic TP-4 thermal pad, 120x20mm x 1.0mm, pack of 4, offers a soft, conformable gap-filler material for efficient heat transfer and reliable component cooling.