VEVOR - 20FT Solar Panel Extension Cable,10AWG Solar Extension Cable Wire with Female & Male Waterproof Connectors,6mm² PV Cable - Black;Red

Extend the reach between a rack PDU and high-current equipment fitted with a C20 or C22 inlet without re-cabling the whole rack. This heavy duty power cord extension pairs an IEC 60320 C20 plug with an IEC 60320 C21 connector - the high-temperature version of the C19, rated for a 155 C (311 F) pin temperature - so it plugs into any C19 outlet on a PDU, UPS or transfer switch and feeds any load with a C20 or C22 inlet. Compatible with any device using an IEC C20 or C22 inlet - blade servers, rack servers, storage arrays, core switches and rack UPS units - because the connector, current rating and temperature rating decide fit here, not the equipment brand. Built on 12 AWG three-conductor SJT cable rated 20 amp at 250 volt, with fully molded, strain-relieved ends that hold their grip through repeated re-racking. Best for: 20 amp 250 volt rack circuits in a data center or server room where a C19 outlet has to reach a C20 or C22 inlet. Not for: C13, C14 or C15 connectors, NEMA wall outlets, or any load drawing more than 20 amp.

When a rack PDU or UPS sits too far from connected equipment, this power extension cord adds reach without a wall-plug adapter. The IEC C20 male plug connects to a C19 receptacle on the source, while the high-temperature IEC C15 female connector mates with a C16 inlet and also fits a standard C14 inlet on compatible rack equipment. Three 14 AWG copper conductors support a 15 amp rating at 250V (3750W), and the 105°C/221°F SJT jacket plus fully molded strain relief helps this IEC power cord withstand warm, densely packed cable-management environments. Use the C15 power cord as a replacement cord or computer power cord extension in data centers, server rooms, network closets, lab benches, and high-density computing installations after confirming both connector shapes and the equipment rating. Best for: extending power from an IEC C19 PDU or UPS outlet to equipment with an IEC C16 or C14 inlet; Not for: standard wall outlets, C20 equipment inlets, incompatible IEC connectors, outdoor locations, or loads above 15A at 250V.

This Extension Cords are last for a long-time. With this extension cord is designed to create greater flexibility on projects requiring the use of electrical implements.