WORX - Nitro WX698L 20V Cordless Oscillating Tool with VibraFree Technology (Battery & Charger Included) - Black

There are so many jobs you can do with an oscillating multi-tool, and with the 20V cordless model from Worx, you can do even more. Multi-tools are designed to get into places where you can’t fit a large tool, like under the sink or reaching around pipes, and when you don’t have to worry about a cord either, you can get to work without getting tangled up or caught on something. Plus, with the Universal Fit System, this tool takes on all major brand’s accessories. It’s the ultimate in flexibility, utility, and portability. The blade operates at 3.2 of oscillation, and the variable speed control gives you a little or a lot depending on just what you need it to do. Plenty of accessories are included so you can get going right out of the box: 1 sanding pad, 30 sanding sheets, 1-1/8” wood cutting end cut blade, 1-3/8” bimetal end cut blade, 3-1/8” semicircle saw blade, on-board blade wrench, carry bag, and a 20V 2.0 Ah battery and 5-hour charger. You’ll constantly find tasks at home or on the job that are done better with this multi-tool. You’ll never use a putty knife again when you can scrape off gunk in a fraction of the time. You can even cut off corroded toilet bolts or rusty faucet nuts. Fit in new flooring by slicing up doorjambs to size. Or remove trim without damaging the wall. Do it all and do it better with the 20V Oscillating Multi-Tool from Worx.

Engineered to be easy to use and to fit into any size workshop, the 20V 7-1/4” Sliding Miter Saw from Worx will have you making a wide variety of miter and bevel cuts in no time. The easy change blade system allows for fast but safe switch-outs between blades. The dust bag and dust extraction system significantly cuts down on the amount of dust you’ll have flying through your workshop and onto your worktable. And the 3600 rpm motor makes smooth, precise cuts. The molded grip on the cutting arm allows for even, comfortable pulls. And the precision-machined guide rails are easy to adjust and hold your lumber firmly in place. What sets this saw apart from other sliding miter saws is its portable table saw design with full-size capabilities. At only 21 lbs, it’s easy to set up and move to different parts of the workshop or even take with you to the job site, yet its sturdy aluminum base gives it the leverage you need for this kind of work. With a smaller arbor, the motor can spin the blade faster than it could a full-size blade, which puts less wear and tear on the tool. This makes it more efficient and will increase the life of this saw. And the smaller footprint means you can actually keep the saw out of the way when you’re not using it.

This 20V Axis Reciprocating/Jig Saw 2-in-1 gives you a whole lot of tool(s) for the money. There’s no need to buy a separate reciprocating saw and jigsaw when you have an Axis. Worx engineers figured out that those two saws actually employ a similar motion to get their different jobs done, and designed a way to put that functionality into one tool. So you get the raw power of a reciprocating saw (3000/min of no-load speed) to tear down structures, but then the head folds down into the base to give you more balance to make those intricate cutouts that only a jigsaw can perform. Plus, there’s no cord to get in your way, so you’re free to move. And at only 4.2 lbs, you can work long hours without getting hand and arm fatigue. The jigsaw is made to cut through wood (2” cutting capacity), PVC pipe (2”), and steel plate (5/32”). While the reciprocating saw also cuts wood and PVC pipe at 2”, but steel pipe at 2”, too. And they both have a 0.75” stroke length. With a built-in dust blower, you’ll always see the shapes you’re cutting in jigsaw mode. And the safety lock-off switch prevents accidental starting. Get an innovative 20V Axis Reciprocating/Jig Saw 2-in-1 from Worx and get more done, with less strain on both your hands and your wallet.