Edifier - Airpulse A80 Hi-Res Active Speaker System (Pair) - Wood

Hi-Res audio certified active speaker system. Designed by Phil Jones. Airpulse A80 active bookshelf speaker system is a perfect combination of uniquely designed conventional loudspeakers and digital systems of XMOS. It supports Hi-Res high-quality audio playback and has obtained a Hi-Res official certification. They are housed in an 18-mm thick high-strength MDF cabinet with beautiful walnut finish.

• Ribbon tweeters and 4.5-inch mid-woofer: The meticulously formulated horn shape produces directional and optimized high frequencies from the ribbon tweeter, so they are aimed at the listeners, minimizing unwanted effect from room reflection.
• Designed from the ground up by Phil Jones: All technical and design aspects of the A80 were personally crafted by famed audio engineer, Phil Jones, to reflect our commitment to providing exceptional audio quality.
• Built-in amp with subwoofer output: The system reserves a subwoofer signal output in case of a situation that needs low-frequency rendering with strong bass. Listen to audio from any source with its multiple inputs, including AUX, PC, USB, Optical, and Bluetooth.
• Horn loaded ribbon tweeter: The A80 horn-loaded ribbon tweeter is the same as A100’s, its thin aluminum ribbon diaphragm has high sensitivity, superb transient response extended frequency range, and well-defined resolution. The result is full and three dimensional sound with each detail well defined.
• 30mm voice coil mid-woofer: The 30mm diameter voice coil is unusually larger than most speakers of this size. It has been shown that larger voice coils have less power compression as they run at a cooler operating temperature. Sonically this means a more realistic dynamic representation of the music.
• Rich sound in a bold design: The A80 cabinet is built with 18mm thick high-strength MDF with a beautiful walnut finish to reduce coloration. The cabinet interior is fully lined with professional waved sound absorption material. The oval-shaped vent tube is carefully designed to minimize wind noise.
• Multiple inputs and subwoofer output: The system in the A80 supports multiple inputs, including Bluetooth, AUX, PC, USB, and fiber optic. The Bluetooth audio receiver is built on Qualcomm’s Bluetooth V5.0 chipset, which supports APT-X decoder.
• TRANSPARENT internal wiring: The A80 uses TRANSPARENT audiophile-grade speaker cable made in the USA for internal wiring. Signals are transferred with utmost accuracy with a minimum loss, which brought you much closer to music!
• Acoustic isolation pads: The 8-degree elevation acoustical isolation pads included can reduce vibration and help to eliminate unwanted levels of audio resonance to achieve the optimal audio performance.
• Ribbon tweeters and 4.5-inch mid-woofer: The meticulously formulated horn shape produces directional and optimized high frequencies from the ribbon tweeter, so they are aimed at the listeners, minimizing unwanted effect from room reflection.
• Designed from the ground up by Phil Jones: All technical and design aspects of the A80 were personally crafted by famed audio engineer, Phil Jones, to reflect our commitment to providing exceptional audio quality.
• Built-in amp with subwoofer output: The system reserves a subwoofer signal output in case of a situation that needs low-frequency rendering with strong bass. Listen to audio from any source with its multiple inputs, including AUX, PC, USB, Optical, and Bluetooth.
• Horn loaded ribbon tweeter: The A80 horn-loaded ribbon tweeter is the same as A100’s, its thin aluminum ribbon diaphragm has high sensitivity, superb transient response extended frequency range, and well-defined resolution. The result is full and three dimensional sound with each detail well defined.
• 30mm voice coil mid-woofer: The 30mm diameter voice coil is unusually larger than most speakers of this size. It has been shown that larger voice coils have less power compression as they run at a cooler operating temperature. Sonically this means a more realistic dynamic representation of the music.
• Rich sound in a bold design: The A80 cabinet is built with 18mm thick high-strength MDF with a beautiful walnut finish to reduce coloration. The cabinet interior is fully lined with professional waved sound absorption material. The oval-shaped vent tube is carefully designed to minimize wind noise.
• Multiple inputs and subwoofer output: The system in the A80 supports multiple inputs, including Bluetooth, AUX, PC, USB, and fiber optic. The Bluetooth audio receiver is built on Qualcomm’s Bluetooth V5.0 chipset, which supports APT-X decoder.
• TRANSPARENT internal wiring: The A80 uses TRANSPARENT audiophile-grade speaker cable made in the USA for internal wiring. Signals are transferred with utmost accuracy with a minimum loss, which brought you much closer to music!
• Acoustic isolation pads: The 8-degree elevation acoustical isolation pads included can reduce vibration and help to eliminate unwanted levels of audio resonance to achieve the optimal audio performance.