Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red
Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red
Related Item
About This Item
- Key Specs
- Accessory Type: Turntable Accessory
- Model Compatibility: Audio-Technica Turntables
- General
- Brand: Audio-Technica
- Model Number: AUD ATVM95MLH
- Product Name: Audio Technica AT-VM95ML/H Headshell/Cartridge Kit
- Color: Red
- Features
- Accessory Type: Turntable Accessory
- Quantity: 1
- Compatibility
- Model Compatibility: Audio-Technica Turntables
- Dimensions
- Product Height: 2 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 3 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Warranty
- Warranty - Parts: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Warranty - Labor: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Other
- UPC: 4961310146504
The AT-VM95ML/H combo kit includes the AT-VM95ML dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
- Frequency Response: 20-25,000 Hz
- Stylus Construction: Nude square shank
- Recommended Load Impedance: 47,000 ohms
- Stylus Shape: 2.2 x 0.12 mil Microlinear
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Whats Included
- Audio Technica AT-VM95ML/H Headshell/Cartridge Kit
Product Manuals
A: Yes, it will fit and the cartridge comes pre-mounted and pre-wired to to the headshell. Stylus overhang is set at 15.5mm.
A: No, it will not. You must use the ANGLED headshell that was provided with your AT-LP3 Turntable. Get the AT-VM95E Cartridge (cartridge only) instead.
Q: Will this fit a Denon DP DJ 100? Thank you
A: It will fit, the only thing you will need to check on is the stylus overhang distance. Our Headshell/Cartridge Combo Kits come with the overhang set at 15.5mm. We have not been able to determine what the stylus overhang distance for the Denon turntable is, we advise being within .5mm of the turntable manufactures specified stylus overhang distance.
Q: Will this fit my Sony PS-LX3 turntable?
A: It will not. You can use the cartridge itself, the AT-VM95E, but not the headshell. Your turntable has a straight tonearm and an angled headshell, you must use the Sony angled headshell.
Q: Will the AT-VM95ML/H work on a Fisher MT-6224 turntable?
A: Yes, it will.
A: Our Headshell/Cartridge Combo Kits come with the stylus overhang distance set at 15.5mm, the AT-LP120-USB Turntable calls for a stylus overhang distance of 16mm. We recommend stylus overhang be within 1mm of that specified by the turntable manufacturer, so the AT-VM95EN/H is good to go out of the package with this turntable.
Q: Will this work on my Fluance RT80?
A: It will fit but is not the best match for the tonearm in terms of cartridge suspension compliance. If you replaced the headshell with one of a lighter weight, say this 6.7-gram model available from Parts Express, Part #230-010 the compliance would be better suited to the lighter effective mass of the tonearm assembly.
Q: Will this work on a vintage 1979 Mitsubishi DP-EC10?
A: It will, but please note a couple of things, you will need to adjust the stylus overhang distance from 15.5mm, which it comes preset at, to 14mm which is the distance specified for your tone arm and make certain that you are NOT using any sub-weight in the end of your tonearm. The cartridge + headshell weight range for your tonearm without a sub-weight is 11 to 16.5g. The AT-VM95E/H Headshell Cartridge combo kit weighs 15.5g.
Reviews
Customers are saying
Customers commend the Audio Technica AT-VM95ML/H Headshell/Cartridge Kit for its excellent sound quality. Users also report that the kit is easy to install. Overall, customers seem very satisfied with the product.
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
The AT-VM95ML/H combo kit includes the AT-VM95ML dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
The AT-VM740xML/H combo kit includes the AT-VM740xML microlinear dual moving magnet cartridge premounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM740xML is part of the updated AT-VMx series which introduces material and design changes to further refine the VM sound offering responsive playback that is especially sensitive to the dynamism of musical expression.FeaturesAT-VM740xML Dual Moving Magnet CartridgeMicrolinear StylusParatoroidal Coils Improve Channel Separation Channel Balance and Transient ResponseCenter Shield Plate Reduces CrosstalkDurable Low-Resonance Polymer HousingAluminum CantileverCompatible with Any Turntable Headshell That Accepts 1/2” CartridgesAT-LT10 Universal ½”-Mount HeadshellFor 4-Pin Turntable Cartridges with or Without Threaded InsertsUltra-Lightweight Aluminum Die-Cast Body Keeps Vibration to the Bare MinimumElongated Through Holes Enable Precise Cartridge Positioning and Overhang AdjustmentOFC (Oxygen-Free Copper) Lead Wires for Exceptional Sound QualitySlip-Resistant Finger Lift Allows Stylus to Be Placed Precisely on the RecordIncludes Mounting ScrewsWhat's in the BoxAT-VM740xML/H VMx Headshell & Microlinear Dual MM Cartridge Combo KitInstallation HardwareManualSpecificationsType: VMFrequency response: 20 to 25000 HzOutput voltage: 3.2 mV (1 kHz 5 cm/sec.)Channel separation: 25 dB (1 kHz)Output balance: 1.0 dB (1 kHz)Tracking force: 1.8 to 2.2 g (2.0 g standard)Coil impedance: 3.2 k ohms (1 kHz)DC resistance: 750 ohmsRecommended load impedance: 47 k ohmsRecommended load capacitance: 150 to 250 pFCoil inductance: 480 mH (1 kHz)Static compliance: 20 × 10?6 cm/dyneDynamic compliance: 7 × 10?6 cm/dyne (100 Hz)Stylus: Nude MicrolinearStylus curvature radius: 2.2 × 0.12 milCantilever: Aluminum tapered pipeVertical tracking angle: 20°Dimensions: 2.7” × 0.73” × 0.85”Weight: 20.3 g (0.72 oz)Replacement stylus (sold separately): AT-VMN40xML
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required. Compatible with any AT-VMN95 replacement stylus.
The AT-VM95SH/H combo kit includes the AT-VM95SH dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 2.7 x 0.26 mil Shibata stylu. Aluminum cantilever. Specially wound coils increase output voltage.. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
| Pros for Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red | |||
|---|---|---|---|
| Sound Quality, Ease of use | There were no pros for this product— | There were no pros for this product— | There were no pros for this product— |
