Audio-Technica - Audio Technica AT-VM95SP Dual Moving Magnet Cartridge - Gray
About This Item
- Key Specs
- Accessory Type: Turntable Accessory
- Model Compatibility: Audio-Technica Turntables
- General
- Brand: Audio-Technica
- Model Number: AUD ATVM95SP
- Product Name: Audio Technica AT-VM95SP Dual Moving Magnet Cartridge
- Color: Gray
- Features
- Accessory Type: Turntable Accessory
- Quantity: 1
- Compatibility
- Model Compatibility: Audio-Technica Turntables
- Dimensions
- Product Width: 3 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 4 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Warranty
- Warranty - Parts: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Warranty - Labor: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Other
- UPC: 4961310146030
This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 3.0 mil conical stylus for 78 RPM records. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus.
- Frequency Response: 20-20,000 Hz
- Stylus Construction: Bonded round shank
- Recommended Load Impedance: 47,000 ohms
- Stylus Shape: 3.0 mil conical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Whats Included
- Audio Technica AT-VM95SP Dual Moving Magnet Cartridge
Q: What is the purpose of the threaded inserts in the cartridge housing?
A: The threaded inserts in the cartridge housing allow the cartridge to be mounted to the headshell with two screws, eliminating the need for nuts.
Q: Why is the cartridge compatible with any AT-VMN95 replacement stylus?
A: The cartridge is compatible with any AT-VMN95 replacement stylus because all VM95 Series cartridges share the same body.
Q: Is the cartridge designed for stereo or mono playback?
A: This cartridge is a stereo cartridge, allowing users to choose between the left and right channels.
Q: What type of stylus does the cartridge come with?
A: This VM95 Series cartridge comes with a 3.0 mil conical stylus.
Q: Can the cartridge be used with other turntables besides Audio-Technica models?
A: This cartridge is compatible with turntables that have a half-inch mount.
Reviews
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 3.0 mil conical stylus for 78 RPM records. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus.
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 3.0 mil conical stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
The Audio-Technica AT-VMx series enhances its premium dual moving magnet cartridges with greater warmth detail and realism. Featuring dual magnets aligned to the stereo groove it delivers excellent channel separation and frequency response. Upgrades like PCUHD® copper wire and reduced coil turns improve clarity and transient response. The paratoroidal coil design and center shield plate reduce crosstalk for a cleaner stereo image. Practical features include easy-mount threaded inserts and a V-cut stylus guard for precise placement making the VMx series a refined user-friendly choice for high-quality vinyl playback.As its name indicates the AT-VM610xMONO is designed for playing mono records. The dual magnets in this cartridge are internally connected to reduce record noise and obtain a highly focused “center” sound image that stereo cartridges can’t provide.FeaturesAT-VMx Dual Moving Magnet CartridgeConical Bonded Stylus (0.6 mil)Paratoroidal Coils Improve Transient ResponseCenter Shield Plate Reduces CrosstalkDurable Low-Resonance Polymer HousingAluminum CantileverCompatible with Any Turntable Headshell That Accepts 1/2” CartridgesPCUHD® (Pure Copper Ultra High Drawability)Like all VMx cartridges the AT-VM610xMONO features PCUHD® (Pure Copper Ultra High Drawability) resulting in richer more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The 0.6 mil conical bonded stylus of the AT-VM610xMONO tracks the center of the record groove for reliable performance and excellent fidelity.Easy to Install & UseEach VMx cartridge body has threaded inserts enabling it to be mounted to a headshell with just two screws
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required. Compatible with any AT-VMN95 replacement stylus.
| Pros for Audio-Technica - Audio Technica AT-VM95SP Dual Moving Magnet Cartridge - Gray | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality, Ease of use | There were no pros for this product— | There were no pros for this product— |
