AudioControl - Dual 8” Single-Voice-Coil 2-Ohm Underseat Loaded Vented Subwoofer Enclosure - Black
Model: TXJTD8
SKU: 6594584
This item is no longer available in new condition. See similar items below
- Key Specs
- RMS Power: 700 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 2 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.2 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 88 decibels
- Dual Voice Coils: false
- Woofer Size: 8"
- Woofer Composition: Polypropylene
- Woofer Surround Material: Rubber
- General
- Brand: AudioControl
- Model Number: TXJTD8
- Product Name: Dual 8” Single-Voice-Coil 2-Ohm Underseat Loaded Vented Subwoofer Enclosure
- Color: Black
- Number of Subwoofers Included: 2
- Audio Power
- RMS Power: 700 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: false
- Audio
- Impedance: 2 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.2 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 88 decibels
- Features
- Dual Voice Coils: false
- Grille Included: true
- Marine: false
- Dimensions
- Woofer Size: 8"
- Product Height: 7.5 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 48 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 10.5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 43 pounds (The out of box weight of the item.)
- Design
- Woofer Composition: Polypropylene
- Woofer Surround Material: Rubber
- Frame Material(s): Stamped
- Enclosure
- Enclosed: true
- Enclosure Type: Vented
- Box Material: Wood
- Box Covering Material: Polyurethane
- Warranty
- Warranty - Parts: 1 year
- Warranty - Labor: None
- Other
- UPC: 609098904476
Upgrade the audio system in your 2020+ Jeep Gladiator JT with this dual 8” single-voice-coil 2-ohm underseat loaded vented subwoofer enclosure from AudioControl. The TXJTD8 is designed specifically for seamless installation under your Gladiator’s rear seat and comes loaded with two AudioControl 8” Spike Series subwoofers for powerful sound. This enclosure is built tough with RoadKill-Armor coating and other protective properties to withstand rugged environments.
- Custom-fit for 2020+ Jeep Gladiator JT vehicles: Designed for installation under the rear seat.
- Weather-resistant fiberglass enclosure: RoadKill-Armor and permanent heat bonded EPM coating allow this enclosure to resist scratches, peeling, cracking, chemicals, stains, leaking, corrosion, and UV damage.
- Vented design with internal bracing: Ported enclosure and added structural support allow for optimal bass output.
- Handles up to 1000W peak power (700W RMS): For powerful sound.
- 2 ohms impedance: Two 4-ohm Spike Series subwoofers wired in parallel to conduct power evenly and keep the speakers working at an appropriate level.
- Fiber matrix paper cone with mica coating: Improves sound reproduction while reducing distortion.
- 88dB sensitivity: Provides precise bass.
- 20Hz – 250Hz frequency response: For accurate sound reproduction.
- Convenient connector options: Features both standard speaker push terminals and a quick-plug harness for easy subwoofer removal.
- Precision-filled poly-fiber material: Provides controlled sound dispersion and tight, accurate bass response.
- Powder-coated steel grilles: For added subwoofer protection.
- High-quality mounting hardware: Allows sturdy installation.
- Custom-fit for 2020+ Jeep Gladiator JT vehicles: Designed for installation under the rear seat.
- Weather-resistant fiberglass enclosure: RoadKill-Armor and permanent heat bonded EPM coating allow this enclosure to resist scratches, peeling, cracking, chemicals, stains, leaking, corrosion, and UV damage.
- Vented design with internal bracing: Ported enclosure and added structural support allow for optimal bass output.
- Handles up to 1000W peak power (700W RMS): For powerful sound.
- 2 ohms impedance: Two 4-ohm Spike Series subwoofers wired in parallel to conduct power evenly and keep the speakers working at an appropriate level.
- Fiber matrix paper cone with mica coating: Improves sound reproduction while reducing distortion.
- 88dB sensitivity: Provides precise bass.
- 20Hz – 250Hz frequency response: For accurate sound reproduction.
- Convenient connector options: Features both standard speaker push terminals and a quick-plug harness for easy subwoofer removal.
- Precision-filled poly-fiber material: Provides controlled sound dispersion and tight, accurate bass response.
- Powder-coated steel grilles: For added subwoofer protection.
- High-quality mounting hardware: Allows sturdy installation.
Whats Included
- AudioControl Dual 8” Single-Voice-Coil 2-Ohm Underseat Loaded Vented Subwoofer Enclosure
- Subwoofer grilles
- Mounting hardware
- Installation guide
- AudioControl Dual 8” Single-Voice-Coil 2-Ohm Underseat Loaded Vented Subwoofer Enclosure
- Subwoofer grilles
- Mounting hardware
- Installation guide
Q: What is the frequency response of the subwoofer enclosure?
A: The minimum frequency response is 20 hertz and the maximum frequency response is 0.2 kilohertz.
Q: What is the subwoofer enclosure made of?
A: The subwoofer enclosure is made of wood.
Q: What is the power handling of the subwoofer enclosure?
A: The peak power handling of this subwoofer enclosure is 1000 watts.
Q: What are the dimensions of the subwoofer enclosure?
A: The subwoofer enclosure has a depth of 10.5 inches, a height of 7.5 inches, and a width of 48 inches.
Q: Will this fit under the back seat of a 2025 Toyota Platinum?
A: undefined
