Alpine - 8" Single-Voice-Coil 4-Ohm Loaded Subwoofer Enclosure with Integrated 120W Amp - Black
More Buying Options
Related Item
Specifications
- RMS Power120 wattsPeak Power Handling240 wattsContinuous Watts x Channel @ Ohms120 x 1 x 4Amplifier Total Power Handling RMS240 wattsMaximum Watts x Channel @ Ohms120 x 1 x 4Impedance4 ohms
- Key Specs
- RMS Power: 120 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 240 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Continuous Watts x Channel @ Ohms: 120 x 1 x 4
- Amplifier Total Power Handling RMS: 240 watts
- Maximum Watts x Channel @ Ohms: 120 x 1 x 4 (This is the maximum load the speaker, subwoofer or amp can drive.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 32 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.15 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Woofer Size: 8"
- Mount Depth: 9.06 inches
- General
- Brand: Alpine
- Model Number: PWE-S8-WRA
- Product Name: 8" Single-Voice-Coil 4-Ohm Loaded Subwoofer Enclosure with Integrated 120W Amp
- Color: Black
- Number of Subwoofers Included: 1
- Series: Restyle (Part of a group of the same product type with similar features.)
- Audio Power
- RMS Power: 120 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 240 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: true
- Continuous Watts x Channel @ Ohms: 120 x 1 x 4
- Amplifier Total Power Handling RMS: 240 watts
- Maximum Watts x Channel @ Ohms: 120 x 1 x 4 (This is the maximum load the speaker, subwoofer or amp can drive.)
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Audio
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 32 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.15 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Features
- Grille Included: true
- Marine: false
- MOSFET Power Supply: true (A specific type of power supply with the advantages of high switching speed and efficiency at low voltages.)
- Bass Boost: None (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Fan Cooled: false
- Dimensions
- Woofer Size: 8"
- Mount Depth: 9.06 inches
- Product Height: 3 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 13.5 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 9 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 18 pounds (The out of box weight of the item.)
- Enclosure
- Enclosed: true
- Enclosure Type: Other
- Box Material: Plastic
- Box Covering Material: Plastic
- Warranty
- Warranty - Parts: 1 year
- Warranty - Labor: 1 year
- Other
- UPC: 793276040244
Add incredible bass to your Jeep Wrangler sound system with this Alpine compact subwoofer for model years 2011 and up. The small, 8-inch design is easy to incorporate in your vehicle's door, and the plug-and-play setup offers effortless use. This Alpine compact subwoofer features harnesses and mounting brackets along with the subwoofer and knob.
Geek Squad Installation Recommended
Visit your local Best Buy store for more information.
- Handles up to 120W RMS power output: For rich sound.
- 32Hz-150Hz frequency response: For accurate sound reproduction.
- Designed for 2011-2018 four-door Jeep Wrangler JKU: Allows you to feel high-performance audio specifically made for your vehicle.
- 8" woofer cone: For enhanced bass response.
- 4-ohm impedance: Conducts power evenly to keep the subwoofer at an appropriate level.
- Built-in 120W RMS class D amplifier: Eliminates the need to install a separate amplifier.
- Side panel controls: To easily make bass level adjustments. Also, you can mount the remote bass knob on your dash and use it to make adjustments.
- Handles up to 120W RMS power output: For rich sound.
- 32Hz-150Hz frequency response: For accurate sound reproduction.
- Designed for 2011-2018 four-door Jeep Wrangler JKU: Allows you to feel high-performance audio specifically made for your vehicle.
- 8" woofer cone: For enhanced bass response.
- 4-ohm impedance: Conducts power evenly to keep the subwoofer at an appropriate level.
- Built-in 120W RMS class D amplifier: Eliminates the need to install a separate amplifier.
- Side panel controls: To easily make bass level adjustments. Also, you can mount the remote bass knob on your dash and use it to make adjustments.
Whats Included
- Alpine 8" Single-Voice-Coil 4-Ohm Loaded Subwoofer Enclosure with Integrated 120W Amp
- Harness
- Mounting hardware
- Owner's manual
- Alpine 8" Single-Voice-Coil 4-Ohm Loaded Subwoofer Enclosure with Integrated 120W Amp
- Harness
- Mounting hardware
- Owner's manual
Q: Does this Alpine subwoofer system come with an amplifier, or do I need to buy one separately?
A: This system includes a built-in 120W RMS class D amplifier, so you don't need a separate one.
Q: Can I control the bass level of this subwoofer?
A: Yes, you can easily adjust the bass level using the side panel controls.
Q: How much power can this subwoofer handle?
A: This subwoofer can handle up to 120W RMS power output for rich sound.
Q: What is the frequency response range of this subwoofer?
A: This subwoofer has a frequency response range of 32Hz to 150Hz, ensuring accurate sound reproduction.
Q: What is the impedance of this subwoofer?
A: This subwoofer has an impedance of 4 ohms.
Q: Will this install underseat in a 2012 Ram 1500 Reg Cab?
A: undefined
Q: will this fit under front seat of 2012 toyota 4runner SR5 ?
A: undefined
Q: Will it work for a 2000 Jeep Wrangler?
A: undefined
Compare similar products
Add incredible bass to your Jeep Wrangler sound system with this Alpine compact subwoofer for model years 2011 and up. The small, 8-inch design is easy to incorporate in your vehicle's door, and the plug-and-play setup offers effortless use. This Alpine compact subwoofer features harnesses and mounting brackets along with the subwoofer and knob. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
When Kicker created the original Hideaway compact HS8 powered sub, they wanted to make a subwoofer that could fit almost anywhere and still deliver the performance that made Kicker famous. The HS10 sub adds the extra punch of a 10" speaker and a built-in 180-watt amplifier to give you really impressive bass response from a sub that will still fit almost anywhere. With a Kicker 10" woofer, you can expect serious low end, and you can install the HS10 under most seats to bring the bass right up close. The tough all-aluminum chassis and stylish metal grille protect the speaker and deliver great sound. High- and low-level inputs give you plenty of options for hooking up your sub, and the HS10 can accept input signals from 0.25 to 40 volts so it works with almost any vehicle without adding a line output converter.The Hideaway includes an adjustable low-pass crossover, a subsonic filter to improve efficiency, a phase switch, and a variable +6 dB bass boost adjustable with the included remote control bass knob. The HS10 also offers two auto turn-on options. The package includes a wiring harness for power, signal and remote turn-on connections with a quick-connect Molex plug to make installation simple.
Revolutionize your car entertainment experience with this JBL BassPro SL 2 powered subwoofer. The 35-120Hz frequency response offers accurate sound reproduction, while the 8-inch shallow-profile design fits comfortably under most vehicle seats. This JBL BassPro SL 2 powered subwoofer features speaker-level and line-level inputs for flexible integration with a variety of audio systems. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
Enjoy your music on the go with this Kicker Hideaway 11HS8 8" subwoofer that features an aluminum woofer cone for deep bass response. The hook-and-loop straps ensure secure installation.
| Pros for Alpine - 8" Single-Voice-Coil 4-Ohm Loaded Subwoofer Enclosure with Integrated 120W Amp - Black | |||
|---|---|---|---|
| Sound Quality | Sound Quality, Bass, Size, Installation Ease | Sound Quality, Bass, Size, Ease of use | Sound Quality, Bass, Size, Ease of use, Installation |
| Cons for Alpine - 8" Single-Voice-Coil 4-Ohm Loaded Subwoofer Enclosure with Integrated 120W Amp - Black | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Space |
Specs
Reviews
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
- Rated 5 out of 5 stars
Great bass
Install was so easy plug and play awesome. And has awesome sound great bass for small Package.
Posted by Gary
- Rated 5 out of 5 stars
Bass
I bought this Subwoofer to Give My 2017 Jeep Wrangler some Bass,and Boy does it. Love the convenience of Plug and Play connections. Couldn’t be Happier.
Posted by Somebody156
- Rated 4 out of 5 stars
For Jeeps!
Know that this is made for Jeep Wranglers. If you have an aftermarket head unit, or something other than a Jeep, the wiring harness is useless. Just get the model without it and buy the harness and amp cables separately. It isn't any cheaper, but you get the correct setup then.
Posted by ATrain
