Alpine - 8" R-Series Dual Loaded Truck Enclosure - Black
Specifications
- RMS Power750 wattsPeak Power Handling750 wattsImpedance4 ohmsMinimum Frequency Response32 hertzMaximum Frequency Response200 kilohertzSensitivity84 decibels
- Key Specs
- RMS Power: 750 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 750 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 32 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 200 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 84 decibels
- Dual Voice Coils: true
- Woofer Size: 8"
- Woofer Composition: Kevlar-reinforced pulp
- Woofer Surround Material: Santoprene
- General
- Brand: Alpine
- Model Number: R2-DB8V-TRK
- Product Name: 8" R-Series Dual Loaded Truck Enclosure
- Color: Black
- Number of Subwoofers Included: 2
- Audio Power
- RMS Power: 750 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 750 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: false
- Audio
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 32 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 200 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 84 decibels
- Features
- Dual Voice Coils: true
- Dimensions
- Woofer Size: 8"
- Product Height: 8.75 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 40.00 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 14.00 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 28 pounds (The out of box weight of the item.)
- Design
- Woofer Composition: Kevlar-reinforced pulp
- Woofer Surround Material: Santoprene
- Enclosure
- Enclosed: true
- Enclosure Type: Ported
- Box Material: MDF
- Box Covering Material: Carpet
- Warranty
- Warranty - Parts: 1 year
- Warranty - Labor: 1 year
- Other
- UPC: 793276084569
From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK Dual 8” Alpine Halo R-Series Preloaded Truck Subwoofer Enclosure with ProLink. Designed for trucks, these enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately)..
- Designed for trucks: These enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications.
- Integrated amp tray: Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately).
- Next-Gen Performance: The ported subwoofer enclosures feature the next generation 8” R2-Series Subwoofers with a more powerful motor that creates deeper, more accurate bass.
- Alpine Halo design: The enclosure pulls design cues from the Alpine Halo Display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge.
- Designed to fit most full sized trucks: Optimized fitment in: 2018-up RAM 1500 (crew cab); 2015-Up Ford F-150 (crew cab); 2018-Up GMC Sierra (crew cab); 2018-Up Chevrolet Silverado (crew cab); 2007-Up Jeep Wrangler (JK/JL) and Jeep Gladiator
Whats Included
- (2) Subwoofer enclosures, preloaded with 2 R2-W8D2 8" R2-Series Subwoofers
- Front and rear ProLink brackets
- Alpine front logo cover
- Two amplifer tray brackets
- Owner's manual
Product Manuals
Q: Will this fit a 2007-2010 Tundra crew max limited? Thank you
A: Not as intended.
A: Yes run them parallel to achieve a 2 ohm load. I ran mine at 4 ohms they still sound great. The amp I’m using is Kicker 1200.1 amp 1200w at 2 & 1 ohm 600w @ 4 ohms
Q: I need instillation service
A: undefined
Compare similar products
From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK Dual 8” Alpine Halo R-Series Preloaded Truck Subwoofer Enclosure with ProLink. Designed for trucks, these enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately)..
This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. You'll just need to connect everything with the amp kit to add some serious bass to your ride.Subwoofer: Polypropylene ConeAmplifier: Low Pass CrossoverDimensions: 12 1/4"L x 7 1/8"W x 2 1/4"HMake your music rock harder with the help of an amplifier with enough power to take your car audio to the next level. This Planet Audio mono amp can handle 1500 watts of max power, and 563 or 1125 watts of RMS power. It features a continuously variable low pass crossover, low level inputs and outputs, power and protection LEDs, heavy duty set screw style terminals, and chrome plated connections. It has it all.Install your amp with ease with the competition quality Soundstorm AKS8 Complete 8 Gauge Amplifier Installation Kit
Dual L7T Truck-Specific Enclosures provide impactful bass and install under the back seat to retain cab space and legroom. It’s simple – more cone area means more air moves – for more bass and up to 20% more cone area than a conventional round sub. KICKER acoustic engineers put the largest voice coil and magnet we’ve ever integrated into a thin sub, then added a next-level top-plate design, unique heat management system and our signature cone stitching all help to give you deep bass and outstanding reliability in a single, mind-blowing design that gives you max output!
When Kicker created the original Hideaway compact HS8 powered sub, they wanted to make a subwoofer that could fit almost anywhere and still deliver the performance that made Kicker famous. The HS10 sub adds the extra punch of a 10" speaker and a built-in 180-watt amplifier to give you really impressive bass response from a sub that will still fit almost anywhere. With a Kicker 10" woofer, you can expect serious low end, and you can install the HS10 under most seats to bring the bass right up close. The tough all-aluminum chassis and stylish metal grille protect the speaker and deliver great sound. High- and low-level inputs give you plenty of options for hooking up your sub, and the HS10 can accept input signals from 0.25 to 40 volts so it works with almost any vehicle without adding a line output converter.The Hideaway includes an adjustable low-pass crossover, a subsonic filter to improve efficiency, a phase switch, and a variable +6 dB bass boost adjustable with the included remote control bass knob. The HS10 also offers two auto turn-on options. The package includes a wiring harness for power, signal and remote turn-on connections with a quick-connect Molex plug to make installation simple.
| Pros for Alpine - 8" R-Series Dual Loaded Truck Enclosure - Black | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality | Sound Quality | Sound Quality, Bass, Size, Installation Ease |
Specs
Reviews
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
- Rated 5 out of 5 stars
Speakers
Only thing that properly fits in the truck just right. Best quality sound as well
This review is from Alpine - 8" R-Series Dual Loaded Truck Enclosure - Black
SavannahD Posted
