Alpine - S-Series Class D Mono Amplifier with Variable Crossovers - Black
More Buying Options from Best Buy and Marketplace sellers
Specifications
- Continuous Watts x Channel @ Ohms330w x 1 @ 4 ohmsMaximum Watts x Channel @ Ohms600 watts RMS x1 @ 2 or 1 ohmsAmplifier ClassDNumber Of Channels1Bass BoostVariableLow-Pass CrossoverVariable
- Key Specs
- Continuous Watts x Channel @ Ohms: 330w x 1 @ 4 ohms
- Maximum Watts x Channel @ Ohms: 600 watts RMS x1 @ 2 or 1 ohms (This is the maximum load the speaker, subwoofer or amp can drive.)
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Number Of Channels: 1
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Low-Pass Crossover: Variable (Devices with this function allow only audio frequencies below a chosen cut-off frequency to pass through to a speaker or sound system. A device may have a cut-off frequency predetermined by its manufacturer (fixed), multiple cut-off frequency options to choose from (selectable), or have the capability for the frequency to be configured by the user (variable).)
- Speaker-Level Inputs: true (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- General
- Brand: Alpine
- Model Number: S2-A60M
- Product Name: S-Series Class D Mono Amplifier with Variable Crossovers
- Color: Black
- Audio Power
- Continuous Watts x Channel @ Ohms: 330w x 1 @ 4 ohms
- Total Power Handling RMS: 330 watts
- Watts Per Channel RMS: 600 watts
- Maximum Watts x Channel @ Ohms: 600 watts RMS x1 @ 2 or 1 ohms (This is the maximum load the speaker, subwoofer or amp can drive.)
- Total Power Handling Maximum: 600 watts
- Watts Per Channel Maximum: 600 watts
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Audio
- Number Of Channels: 1
- Minimum Frequency Response: 10 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 40 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Signal-to-Noise Ratio (SNR): 85 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Features
- Low-Pass Crossover: Variable (Devices with this function allow only audio frequencies below a chosen cut-off frequency to pass through to a speaker or sound system. A device may have a cut-off frequency predetermined by its manufacturer (fixed), multiple cut-off frequency options to choose from (selectable), or have the capability for the frequency to be configured by the user (variable).)
- Remote Control Included: No
- Input
- Speaker-Level Inputs: true (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- Output
- Preamp Outputs: true
- Dimensions
- Product Height: 2.25 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 8.7 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 8.25 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 4.8125 pounds (The out of box weight of the item.)
- Other
- UPC: 793276085160
Pump up the audio in your ride with this Alpine Next-Generation S-Series mono power amplifier. Delivering 330W at 4 ohms, or 600W at 2 ohms, this amplifier is powerful enough for speakers and subwoofers. Its small footprint fits almost anywhere in your car. This Alpine mono power amplifier has improved heat sink and shutdown circuit designs to eliminate thermal shutdowns.
- Robust power output: 330 watts RMS x1 at 4 ohms, 600 watts RMS x1 at 2 ohms, 600 watts RMS x1 @ 1 ohm
- Variable low-pass filter, bass boost & subsonic filter: Ensure flexible operation to get just the right bass tone
- 4 ohms impedance: Conducts power evenly to keep the speaker at an appropriate level.
- Preamp- and speaker-level inputs: Allows installation in almost any vehicle, even one with a factory radio
- Class D circuitry: Ensures reliable power handling and it is small enough to fit in almost any location
- Flexible application: Selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times
- Easy control access: Sound controls are now located on the side panes for easier acccess to gain and crossover controls
- Optional remote: RUX-KNOB.2 wired remote available for rear channels
Whats Included
- Alpine S2-A60M mono amplifier
- Owners manual, “Birth Sheet” that certifies the actual power of the amplifier, Alpine Registration Card, Warranty sheet, Installation guide
- (x2) Connection end covers w/4 attachment screws, (x4) self tapping screws, (x1) hexagon wrench
Product Manuals
Q: What is the signal-to-noise ratio of this amplifier?
A: This amplifier has a signal-to-noise ratio of 85 decibels.
Q: How much does this amplifier weigh?
A: This amplifier weighs 4.8125 pounds.
Q: What is the maximum power output of this Alpine amplifier?
A: This Alpine amplifier can deliver up to 600 watts of power at 2 ohms.
Q: Does this amplifier have a variable low-pass filter?
A: Yes, this amplifier features a variable low-pass filter to help you fine-tune your bass output.
Q: What kind of circuitry does this amplifier use?
A: This amplifier uses Class D circuitry for reliable power handling in a compact size.
Q: Does this amplifier come with a remote control?
A: No, a remote control is not included with this amplifier.
A: 600w rms @ 2ohm
Compare similar products
Pump up the audio in your ride with this Alpine Next-Generation S-Series mono power amplifier. Delivering 330W at 4 ohms, or 600W at 2 ohms, this amplifier is powerful enough for speakers and subwoofers. Its small footprint fits almost anywhere in your car. This Alpine mono power amplifier has improved heat sink and shutdown circuit designs to eliminate thermal shutdowns.
Pump up the audio in your ride with this Alpine Next Generation S-Series four-channel car amplifier. Delivering 60W per channel, or 180W to a subwoofer and 60W to two channels, this amplifier is extremely versatile. The compact size provides mounting versatility. This Alpine S-Series four-channel car amplifier automatically reduces output when it senses overheating risks.
Pump up the audio in your ride with this Alpine mono power amplifier. Delivering 400W at 4 ohms, or 600W at 2 ohms, this amplifier is powerful enough for speakers and subwoofers. Its small footprint fits almost anywhere in your car. This Alpine mono power amplifier has improved heat sink and shutdown circuit designs to eliminate thermal shutdowns.
Create a custom sound experience with this KICKER CX-Series mono amplifier. The variable 12dB crossovers provide the control you need to get the exact sound you want, and the 24dB subsonic filter protects against damaging frequencies. With its small footprint and Fail-safe Integration Technology-PLUS, this KICKER CX-Series mono amplifier is easy to install and works with almost any radio.
| Pros for Alpine - S-Series Class D Mono Amplifier with Variable Crossovers - Black | |||
|---|---|---|---|
| Sound Quality | Sound Quality | There were no pros for this product— | Sound Quality, Power, Size, Ease of use, Price |
| Cons for Alpine - S-Series Class D Mono Amplifier with Variable Crossovers - Black | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Heat |
Specs
Reviews
Rating 4.9 out of 5 stars with 11 reviews
- Sound Quality (4)
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Customers often buy these together
Car Subwoofers
KICKER - CompRT Down-Firing 12” Dual-Voice-Coil 2-Ohm Loaded Subwoofer Enclosure - Black
$297.99The price was $349.99
Alpine - Next Generation S-Series 12" Dual-Voice Coil 4-Ohm Subwoofer - Black
$215.99The price was $269.99
Vehicle Audio Video Security Installation Parts
KICKER - C-Series 8AWG 2-Channel Amplifier Power Kit - Gray/Blue
$84.99The price was $149.99
KICKER - C-Series 4AWG 2-Channel Amplifier Power Kit - Gray/Blue
$115.99The price was $199.99
