Questions & Answers

Q: QuestionWe just purchased the model PEM31SF3SS with this trim kit and have a question about installation: Are you supposed to see the gap along the sides? Our prior trim kit sat flushed along the cabinet

Asked 5 years ago by Vicki.

• A:Answer Hello Vicki, Thanks so much for reaching out. Congratulations on the purchase of your new microwave. We hope you enjoy it. Our trim kits are designed to provide a built-in look while also providing air flow necessary to the microwave. If you are seeing unnecessary gaps, please make sure you have installed the unit correctly according to the installation instructions. We hope this helps. Best wishes -Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have midel je52150mr1sa. Is there a trim ring kt available for it?

Asked 5 years ago by Thompson.

• A:Answer Hello Thompson, thank you for reaching out to us about this trim kit! For your model, there is not a compatible trim kit available. We hope this helps. If you have any additional questions, please feel free to reach back out to us. HC

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this trim kit work with model JES2251SJ?

Asked 5 years ago by UnhandyMan.

• A:Answer Hi there - Great question! Microwave model JES2251SJ is a countertop only model; it is not designed or approved for a built-in installation. There is not a trim kit available for this microwave model to ensure the correct venting of the unit. Thanks so much for checking! -Mikayla

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this Trim Kit JX87SFSS work with a Ge profile Microwave PES7227SLSS

Asked 5 years ago by shad.

• A:Answer Hi there, Shad - Great question! PES7227SLSS is a countertop only model; it is not designed or approved for a built-in installation. There is not a trim kit available for this microwave model to ensure the correct venting of the unit. Thanks for checking! -Mikayla

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat Trim Kit for GE Microwave model PEM31SF3SS do I order?

Asked 5 years ago by TrimKit.

• A:Answer Hi there- Great question! The part numbers for the 27" and 30" trim kits are as follows: 27": JX827SFSS 30": JX830SFSS Thanks so much for checking! -Mikayla

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncan i use the trim kit model JX827-DMBB for a GE Profile PEM31FSS?

Asked 5 years ago by John.

• A:Answer Hi John, thanks for your question! We're finding that the trim kit you provided is no longer being manufactured. Trim kits are model specific. The 27" trim kit that we're seeing that is compatible with this unit is as follows: JX827FMDS. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHello! I just bought a GE microwave JES1657DM/SM/BM what trim kit can I buy for it? I can't find a match anywhere, please help!

Asked 5 years ago by JessicaG.

• A:Answer Hi there, JessicaG - Great question! Microwave model JES1657DM is a countertop only model; it is not designed or approved for a built-in installation. There is not a trim kit available for this microwave model to ensure the correct venting of the unit. Thanks for checking! -MikaylaGEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhich trim kit is used with PEB7227DLBB microwave? JX827DFBB or JX7227DLBB 1trim kit?

Asked 5 years ago by Larry.

• A:Answer Hi there, Larry - Great question! The matching trim kit for microwave PEB7227DLBB is JX7227DLBB. Thanks for asking. -MikaylaGEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI own GE microwave model PEM31SF3SS, from 2018. I need replacement trim kit. The trim bought originally is JX827SF1SS, but do not see this model number trim available anymore. I only see JX827SFSS. It appears to be the same, but not sure. Will it work?

Asked 5 years ago by JW.

• A:Answer Hi JW - Thanks for choosing Model # PEM31SF3SS! We are sorry to hear a new trim kit is needed and apologize for any inconvenience this has caused. Yes, JX827SFSS is the same as JX827SF1SS. When the model is manufactured, the extra number is placed on the appliance rating plate and product registration card. This number is used to identify manufacturing specific data when the appliance is made. If you have any additional questions, don’t hesitate to ask. We are also happy to help at GEAppliances.com! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI bought a 24” GE microwave JES2051SNSS and need a 27” trim kit. What is the part number I need. It’s going to replace my old GE PEB7226SF1SS.

Asked 5 years ago by RON.

• A:Answer Hi RON, thanks for reaching out! The 24" model that you purchased is only able to be installed via a countertop. We would not recommend attempting to build this unit into surrounding cabinetry do to the fact that this unit has not been tested or approved for that style of installation. The PEB7227ANDD model is a built in model that has the same cutout space needed as your older PEB7226SFSS model. The new unit, while the body is not stainless steel, does have stainless steel trim kits available to it to help it blend with the rest of your kitchen. You can view the 27" stainless steel trim kit for the PEB7227ANDD model here: JX7227SLSS. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI just purchased a GE PEM31SFSS And need to buy a trim kit.can you tell me which one works

Asked 5 years ago by Ruth.

• A:Answer Hi Ruth, thanks for reaching out! We'd be happy to help! You can view the 27" trim kit part number here: JX827SFSS and the 30" part number here: JX830SFSS. The only real difference between these two is how much overlap the trim kit has over the surrounding cabinetry. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill this fit the GE pes7227slss microwave?

Asked 5 years ago by xraydoc68.

• A:Answer Hi xraydoc68 - Thanks for considering GE Profile™ 2.2 Cu. Ft. Countertop Sensor Microwave Oven Model #:PES7227SLSS! This countertop microwave is not compatible with a trim kit. The "built-in ready" model is GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven Model #: PEB7227ANDD. This is our "stainless" model, meaning that it is the model that is paired with other stainless appliances. The door and control is the same dark gray (Dark Dorian) used on the stainless oven door and control panel, as well as the accents and case sides on other stainless appliances. Model #: PEB7227ANDD is compatible with 27" Trim Kit JX7227SLSS (Stainless) and 30" Trim Kit JX7230SLSS (Stainless) sold separately. We suggest viewing the Quick Specs document at the following link for cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - Note: Model JX827SFSS is compatible with GE Profile™ 1.1 Cu. Ft. Countertop Microwave Oven Model #:PEM31SFSS. If you need further assistance with product selection, do not hesitate to ask, we are happy to help at GEAppliances.com! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have just bought a built-in microwave GE Profile PEB7227ANDD and my previous trim kit is too small. What trim kit is the correct one for this GE Model? Thank you

Asked 5 years ago by Spanisharmada.

This question was asked about the related product: 27" Built-In Trim Kit for Select GE Microwaves - White

• A:Answer Hi Spanisharmada - Thanks for choosing GE Profile Model # PEB7227ANDD. We certainly appreciate your loyalty! This model is compatible with 27" Trim Kit JX7227SLSS (Stainless steel) and 30" Trim Kit JX7230SLSS (Stainless steel). We suggest viewing the Specifications document at the following link for product and cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - We apologize for any inconvenience this has caused. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace model PEB7226SF1SS with a stainless microwave that fits the existing trim kit, which perfectly fits the cabinet space created specifically for this microwave and trim kit. What microwave model do you recommend?

Asked 5 years ago by Debra.

• A:Answer Hello Debra - Thank you for reaching out about your microwave. We will be happy to help you find the perfect replacement. The model PEB7227ANDD requires the same cabinetry cutout as your current microwave. However, due to airflow and heat requirements, as well as the continuing development of the appearance of our microwaves, new microwaves will not retrofit previously used trim kits. So the trim kit JX7227SLSS or JX7230SLSS will be needed. Keep in touch! - JB

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a PEB2060DM1BB with a black trim kit. I want to replace the trim kit with stainless steel. Is there a kit I can purchase to fit this built in micro wave? Thanks for your response

Asked 5 years ago by Anonymous.

• A:Answer Hello and thank you for reaching out. We apologize for the inconvenience as there is not a stainless steel trim kit available for your microwave. Please let us know if you have any more questions. - JB

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a Conventional built in electric wall oven model number psb9100sf2ss cabinet opening with 27" by 18" I am looking for a frame to cover up the rough opening.My microwave is smaller than the opening Approximate size 26 5)8 th" by 18 3)4 quarters

Asked 5 years ago by Dleahy.

• A:Answer Hi Dleahy - Thanks for reaching out to us and for choosing GE Profile™ 27 in. Single Wall Oven Advantium® Technology Model #: PSB9100SFSS. We do not offer a trim kit for this wall oven. We suggest checking with a cabinet company regarding cabinet modifications or contact BestBuy regarding available installation options. We apologize for any inconvenience this has caused. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have GE Microwave model GT4185sks built in w/trim kit that needs replacing. Cavity is 27" wide x 20.75" tall x 21.5" deep. Cabinet facing frame is 25.5" x16.75" outside max of frame =27x19 The current trim opening is 24"x 13" What is best option?

Asked 5 years ago by Golfer21.

• A:Answer Hi Golfer21 - It's nice to hear from you! We are sorry to hear your microwave needs to be replaced and apologize for any inconvenience this has caused. We do not recognize Model GT4185sks. Based on dimensions, we offer GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven Model #: PEB7227ANDD. This model is compatible with 27" Trim Kit JX7227SLSS/Stainless steel (sold separately). We suggest viewing the Specifications document at the following link for cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - If you have any additional questions, do not hesitate to ask, we are happy to help at GEAppliances.com! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi I have a old GE model number JX16 built in microwave with old trim kit trim kit is approx 19' in height and 25' in width. I would like to replace this microwave. Any recommendations on which model and trim kit to go with? thanks

Asked 5 years ago by ed.

• A:Answer Hello Ed - Thank you for reaching out about your microwave. We will be happy to help. JX16 does not appear to be a proper model number. Please reach out to us with the full model number to your unit. Thanks. - JB

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi I have an old GE Sensor Turntable Microwave Model No JE1550GY 001 & 27" trim kit. Need to replace it with a stainless steel micowave & 26.9- 27" stainless trim kit. my current trim kit measures: 19.7" x 26.8". need either 26.8- 27" wide . Help plz.

Asked 5 years ago by Replacement.

• A:Answer Hi - It's nice to hear from you! We are sorry to hear your microwave needs replacing and apologize for any inconvenience this may cause. The model with comparable cabinet dimensions is GE Profile™ 1.5 Cu. Ft. Countertop Convection/Microwave Oven Model #: PEB9159SJSS (27" Trim Kit JX9152SJSS sold separately). We suggest viewing the Quick Specs at the following link for product and cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB9159SJSS_R2.pdf - For comparison, here's the Quick Specs for Model JE1550GY: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=972470034.PDF - Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question