can and/or how dose the speakers plug in to a tv null

Headphone jack of TV into aux of a stereo receiver

These are not amplified. You will need one to get sound to them.

The TV would need to have connections for speaker wire. Generally you'll need a receiver to connect the speakers and the TV.

You really need a small amp or receiver to do these any good. Buy yourself an inexpensive stereo amp used or online. BB HAS A NICE LITTLE YAMAHA FOR low bucks. Avoid surround, be a man, and get you a starter system Pilgrim ! You could also use an Audioengine 2+ system for $250. This gives you great sounding speakers, built in amp and will run off the audio output jacks on your TV. I own this system for use in my office and it still amazes me with its clarity and wonderful sound.

Your need an amplifier to use the speakers

They are designed to be hooked to an amp or receiver....unless your TV has speaker out spring clips that you can run speaker wire out TO the speakers. Something must power these speakers as they do not have amps built in.

No, you'll need some type of amplifier to power the speakers. Usually a AV Receiver is required.

If you want to use these speakers with a TV, you will need to buy an audio amplifier (sample below which is a good starter product as it is relatively inexpensive and will hold up) or a converter which you can connect the speaker wires to and then run an audio cable or RCA cable (shown below) to the tv.

It can't. you need to have an amplifier in order to power them. You'd have to run an audio out cable from the tv to an amplifier or a/v receiver.

The only connection on the back of the speakers is for speaker wire. You would need some sort of receiver or amplifier to connect them to.

Yes. Connect them either through speaker outputs on the tv or, plug them into the earphone jack.

“can and/or how dose the speakers plug in to a tv”

Asked by Ghost 12 years ago

Answer This Question

See all questions & answers

5-1/4" 2-Way Bookshelf Speakers (Pair)-Front_Standard

1-10 of 11 Answers

Headphone jack of TV into aux of a stereo receiver
Answered by Stitchin 12 years ago
Sorry, there was a problem. Please try again later.
These are not amplified. You will need one to get sound to them.
Answered by KDawg78 11 years ago
Sorry, there was a problem. Please try again later.
The TV would need to have connections for speaker wire. Generally you'll need a receiver to connect the speakers and the TV.
Answered by InsigniaCustomerSupport 12 years ago
Sorry, there was a problem. Please try again later.
You really need a small amp or receiver to do these any good. Buy yourself an inexpensive stereo amp used or online. BB HAS A NICE LITTLE YAMAHA FOR low bucks. Avoid surround, be a man, and get you a starter system Pilgrim ! You could also use an Audioengine 2+ system for $250. This gives you great sounding speakers, built in amp and will run off the audio output jacks on your TV. I own this system for use in my office and it still amazes me with its clarity and wonderful sound.
Answered by Deuce 10 years ago
Sorry, there was a problem. Please try again later.
Your need an amplifier to use the speakers
Answered by luvs2shootpics 10 years ago
Sorry, there was a problem. Please try again later.
They are designed to be hooked to an amp or receiver....unless your TV has speaker out spring clips that you can run speaker wire out TO the speakers. Something must power these speakers as they do not have amps built in.
Answered by Poppanick 10 years ago
Sorry, there was a problem. Please try again later.
No, you'll need some type of amplifier to power the speakers. Usually a AV Receiver is required.
Answered by SmooveG 11 years ago
Sorry, there was a problem. Please try again later.
If you want to use these speakers with a TV, you will need to buy an audio amplifier (sample below which is a good starter product as it is relatively inexpensive and will hold up) or a converter which you can connect the speaker wires to and then run an audio cable or RCA cable (shown below) to the tv.
I would recommend:
- OSD Audio - Amplifier - 120 W RMS - 2 Channel
  Not Yet Reviewed
- Dynex™ - 6' Stereo Audio RCA Cable
  Rating: 4.6 out of 5 stars with 60 reviews
Answered by dms123 11 years ago
Sorry, there was a problem. Please try again later.
It can't. you need to have an amplifier in order to power them. You'd have to run an audio out cable from the tv to an amplifier or a/v receiver.
Answered by Puzz 11 years ago
Sorry, there was a problem. Please try again later.
The only connection on the back of the speakers is for speaker wire. You would need some sort of receiver or amplifier to connect them to.
Answered by Mpgrasser 11 years ago
Sorry, there was a problem. Please try again later.

1-10 of 11 Answers