“This appears to be VESA mountable, but looks like mounting it would block the use of the ports. Is it VESA mountable w/o blocking the ports?”
Answer This Question
1-5 of 5 Answers
it has 100mm mounting holes so yes it is vesa mountable.
Sorry, there was a problem. Please try again later.That is a good question ... I didn't look at the VESA mounts until I came across this question. The VESA for it are 100 x 100. The bolt holes are roughly 1/4" above where the section for the ports are. I don't have mine mounted, but I would suggest that if you are planning to use a VESA Mount, do not get one that is compatible with higher VESA sizes in the second number of the VESA, for Example, a 200 x 100 VESA would work because the 100 is the number to worry about (this is the height of the mount), but a 200 x 200 VESA would not because it would then cover the ports.
Sorry, there was a problem. Please try again later.This monitor works great with VESA 100 mounting. I used the Loctek D7L at https://www.staples.com/Loctek-D7L-10-34-Desk-Monitor-Mount/product_24174415 I wired up every port on the monitor and feed the cables through the arm at installation. Be warned, this is a two person job as this monitor is 26 pounds and 40 inches.
Sorry, there was a problem. Please try again later.Would depend on the mount. Bottom of the mount would have to be minimally sized to not cover ports. There's just over half an inch from the bottom of the screw hole to the top of the ports.
Sorry, there was a problem. Please try again later.This is not vesa mountable.
Sorry, there was a problem. Please try again later.