“What do i need to do for the dishes to dry after cycle. Is there something i am missing.”
Answer This Question
1-3 of 3 Answers
Bosch dishwashers have no heating element in the tub to dry dishes. They just use superheated water during the last rinse so that they dry naturally inside the tub. You have to let them sit for several hours before they are completely dry. But this method minimizes damage to dishes and glassware since heating elements can ruin things.
Sorry, there was a problem. Please try again later.Hi DRY. Thank you for your purchase of 100 Series Bosch dishwasher. We want your experience with Bosch to be a positive one, please contact Bosch Customer Service @ 800-944-2904 for assistance with your dishwasher. Drying results can be affected by many factors including water hardness, the amount of plastic items in the load, the amount of edges, depressions, or lips on the dishware, use or non-use of suggested rinse aid, pre-rinsing of dishes, cycle selection, loading, etc. Following are suggestions for improving drying in dishwashers. 1.For all dishwashers, to achieve best drying results, always use a liquid rinse aid, even if your detergent contains a rinse aid or drying additive. Use of rinse aid causes sheeting action on dishware and top & sides of tub. 2. For best dishwashing results, observe the following when loading the dishwasher: ■ Do not pre-wash items with loosely attached food soil. Simply scrap off larger food items into trash and place soiled dishware into racks. See Use & Care Guide for loading suggestions. 3. With any dishwasher, when unloading the dishwasher, to prevent water from dripping onto dry dishes, unload the lower rack first. 4. Consider using Sanitize * option - Increases the temperatures and retains them for an extra long time to obtain a defined disinfecting performance. Continuous use of this function increases the hygiene status. This additional option is ideal for cleaning items such as chopping boards and baby bottles. Using the Sanitize option may also improve drying. 5. Consider using Extra Dry * option - An increased temperature during the final rinse and an extended drying phase ensure that plastic parts dry better. 6.Consider adjusting Intensive drying function - The final rinse uses a higher temperature which improves the drying result. This feature has two settings: d:00 OFF d:01 ON 1. Press the On/Off button 2. Hold down function key and press Start button until the display indicates H::x (x can be any number). 3. Release both buttons. 4. Press function key # until the display indicates the factory set value d:00. 5. Press function key to switch the intensive drying feature ON d:01 or OFF d:00. 6. Press Start button to save setting. Relative to odor concern please ensure drain hose is not sitting flat from dishwasher to drain, drain hose should have high loop from dishwasher to drain to avoid backflow of drained water. Please consult your Installation Guide instructions.
Sorry, there was a problem. Please try again later.Let the dish stay inside, the heat that is created during the washing will sanitized the dishes there fore will be dry.
Sorry, there was a problem. Please try again later.