“Can I use the Acoustimass 300 wireless bass module as the subwoofer for my regular home theater receiver? (wired with LFE cable)”

1-10 of 10 Answers

• The input, per BOSE, is not yet operational last I heard.

  Answered by Justjohnne 8 years ago

  Helpful (15)Unhelpful (3)

  Report

  Sorry, there was a problem. Please try again later.

• This system is not designed to work with non-Bose home theater systems. Thanks you for reaching out to ask us.

  Answered by Bose Support 9 years ago

  Helpful (5)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.

• I now think so.. This was my same question. The photo posted from a previous answer clearly shows a SUB-input as a second option for connection to the soundbar. So that potentially means this connects to an analog output located on the soundtouch 300.

  Answered by Anonymous 9 years ago

  Helpful (5)Unhelpful (3)

  Report

  Sorry, there was a problem. Please try again later.

• The answer is yes!!!! Just discovered today that i can use my bose acoustimass 300 wireless bass module with a surround sound receiver!!! Using the Acoustimass IN input on the bass module connected with a 3.5 to RCA but you will need to remove the sheild or "GROUND" from the wire itself make sure that there is no shield from one end of the wire to the other. All i did was cut my RCAs off cut the shield and connected back the center pin wires!! Works like a charm!!!!

  Answered by afallenking101 8 months ago

  Helpful (1)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• It does have a regular LFE input on the back so I suspect that it would work, however there are less expensive 12" models on the market. The whole point of this subwoofer is to work with the Bose Soundtouch wireless system, so you'll be paying all that extra money for the wireless stuff you won't use with a regular LFE connection.

  Answered by xKing 9 years ago

  • 

  Helpful (3)Unhelpful (2)

  Report

  Sorry, there was a problem. Please try again later.

• No, this will only work with the Soundtouch 300.

  Answered by VetteGuy 9 years ago

  Helpful (2)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.

• No, it works only with the Bose SoundTouch 300 soundbar.

  Answered by lou 9 years ago

  Helpful (2)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.

• No

  Answered by TechieJohnsCreek 8 years ago

  • Verified Purchase
  • 

  Helpful (1)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.

• There is a 3.5 mm jack input as well as an Acoustimass In input. There are no other ways to physically connect to the module.

  Answered by ACE3Boys 8 years ago

  Helpful (0)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.

• No, the Acoustimass 300 only connects wirelessly and must pair with other Bose 300 speaker systems.

  Answered by mikeheel 9 years ago

  Helpful (0)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.