1-10 of 10 Answers
Any pc with usb header and PWM fan control
Sorry, there was a problem. Please try again later.The fan itself will work with any PC that has a 4 pin (PWM) fan connector and a 120mm mounting position for it (The PWM connection isn't necessary with the Corsair Commander Pro, as 6 are supplied). The RGB features of the fan will only work if you have a corsair controller hub to plug it into. Each fan has 2 separate wires, one for supplying the fan power and controlling its speed, and one for supplying the LED's power and controlling the colors. Either the Corsair RGB fan hub (CO-8950020) or the Corsair Fan Controller Commander Pro (CL-9011110-WW) will control the RGB features of the fan and will require an internal USB 2.0 connection and a SATA power connection.
Sorry, there was a problem. Please try again later.Yes. Thyi8sa FAN has 4-pin connector that can be used with any FAN port on MoBo, but! If you want to control RGB you need other devices too. FAN hub and RGB hub
Sorry, there was a problem. Please try again later.Yes and no. As long as your PC has a spot for the fan and a header to power it from. You will not be able to control the LED’s without the Lighting Node sold by Corsair.
Sorry, there was a problem. Please try again later.That would depend on your Motherboard memory type requirements. DDR3, DDR4 etc...
Sorry, there was a problem. Please try again later.It will work with any PC that has Fan headers on the motherboard. You also need to make sure you have a large enough power supply to power all components.
Sorry, there was a problem. Please try again later.You would need RGB headers on your Motherboard, or buy the commander pro into a open USB header.
Sorry, there was a problem. Please try again later.Yes these fan will work with any PC Provided you have the commander pro or the lightning node you can use the fans without either of them but then you might as well buy other fans the only reason you would buy THESE fans is because 1: you want REALLY Good fans and 2: You want to be able to control the speed of the fans and the color of the fans You might want to look into getting the commader pro of see if you can buy a case that has it included ENJOY!!!
Sorry, there was a problem. Please try again later.As long as the case has a mounting point for a 120mm fan yes it will
Sorry, there was a problem. Please try again later.As long as it has internal USB headsers to connect the rgb hub and commander pro/lighting node pro and the 4 pin PWM header on the motherboard then you should be fine.
Sorry, there was a problem. Please try again later.