1-4 of 4 Answers
Yes, the Crucial Pro Overclocking 32GB (2x16GB) DDR5-6000 CL36 kit is fully compatible with the MSI PRO Z890-S WIFI (LGA 1851 Intel Z890 ATX motherboard). • This board supports DDR5 UDIMM up to 8800+ MT/s (OC), with 4 slots and max 256GB capacity. • DDR5-6000 is well within spec (JEDEC up to 6400 MT/s, overclocking higher). • It supports Intel XMP 3.0, so enable XMP in BIOS (OC tab → XMP Profile → Enabled, pick Profile 1 for the rated 6000MT/s CL36). • Crucial/Micron modules are widely compatible on MSI Z890 boards—no major issues reported in forums or Q&A. Install tips: • Use dual-channel slots (usually A2 & B2 or 2 & 4—check manual). • Update BIOS first from MSI support site for best stability. • After install, enable XMP → save & exit → test with MemTest86 or Time Spy. It should run at full speed without problems. If boot issues (rare), try one stick or reset CMOS
Sorry, there was a problem. Please try again later.If it is a ddr5 motherboard.
Sorry, there was a problem. Please try again later.Yes, it should run just fine, as DDR5 boards will take DDR5 RAM
Sorry, there was a problem. Please try again later.Hello, Thank you for reaching out to us. We appreciate your interest in Crucial products. We would like to inform you that the Crucial - Pro Overclocking 32GB (2x16GB) DDR5 6000MHz C36 UDIMM Desktop Memory - Black CP2K16G60C36U5B: https://www.crucial.com/compatible-upgrade-for/msi%28microstar%29/pro-z890-s-wifi https://www.crucial.com/memory/ddr5/cp2k16g60c36u5b Once the DRAM is purchased, please follow the steps given in the link below to install it in your system: https://www.crucial.com/articles/about-memory/how-to-upgrade-desktop-memory Thank you for your patience and understanding. Meanwhile, if you have any further query, please feel free to reach out to us. You can also visit our contact page: https://www.crucial.com/support/contact to know about other ways to reach out to us. Regards, Crucial
Sorry, there was a problem. Please try again later.
