“Can the case handle a 280mm AIO (side, top or front)?”
Answer This Question
1-4 of 4 Answers
I'll answer my own question... it appears that it can handle a 280mm AIO on the top.
Sorry, there was a problem. Please try again later.Top = 14.125" Length Top to Motherboard Top = 2.5" Top width = 7.5" All approximates via tape measure. FRONT SOLID FACE / side vented Panel At the bottom it has the opening to the PSU updraft; so you can add three fans remember the bottom may work against the flow of the PSU which is placed upside-down in the case, so the fan is not blowing out the bottom but instead sucking air in - in my setup (Apevia 1000watt 80 Gold Plus PSU). Your setup may be different. As my R/S Fans (2 of them) are blowing in instead of out also. So my case has only one exhaust fan and that is the CPU Water Cooling Fam/Rad setup (plus the open top).
Sorry, there was a problem. Please try again later.You can top mount
Sorry, there was a problem. Please try again later.Thank you for reaching out to us. Yes, this case is capable of installing a 280mm AIO. The only spot where you can install a 280mm AIO on this case would be the top of the case. If you have any further questions or concerns then please do not hesitate to give our tech support agents a call for any assistance; we're always happy to help. Tech Support: (855) 888-2039 [email protected] Hours of Operation: Monday - Friday: 8:30AM - 6:00PM PST Saturday: 9:30AM - 3:00PM PST -CyberPowerPC Support
Sorry, there was a problem. Please try again later.
