A:AnswerIf you plan on doing anything other than watching Netflix or browsing reddit with this PC, change the CPU cooler and flip some fans around to intake. After reading all the reviews about the CoolerMaster CPU cooler that comes installed and the fan configuration, I immediately installed a Noctua NH-D15s chromax.black CPU cooler and flipped the side panel fans around to intake position. CPU doesn't exceed 60C with CPU-Z benchmark or CPUbenchmark.exe and is putting out some impressive specs.
A:Answerthe computer came into stock thursday night and the other one with a 10700 k processor. so idk if it will be soon but always keep a eye out. i think they restock every 1-3 weeks depending on how much cards they can get in.
A:AnswerBased on reviews prior to purchasing I went ahead and got a water Cooled AIO to sub out the CPU fan as soon as I bought it. I ran pretty intense games for a day or two before I made the switch and the temp in the case hovered around 50-60 during gameplay. After I put in the AIO I see 40 to mid 50s depending on what I'm doing.
Long story short, you can get away with what comes stock. But if you want to play it safe and modify, there's always room for upgrades.
A:AnswerAt least with the setup that mine came with, no.
I disconnected the cables, unscrewed the 4 screws holding the cooler to the mobo, put the new cooler in, and plugged in the wires. Fairly painless process.
A:AnswerUsually around Tuesdays and Thursdays early morning is when pc's like this restock. no specified time but I would keep an eye on the webpage. However, I've seen this PC be in stock even on other days through the week. Your best bet is to just check the page every day. That's what I did.
A:AnswerThank you for reaching out. Windows 10 is installed onto the SSD. If you have any further questions or concerns then please do not hesitate to give our tech support agents a call for any assistance; we're always happy to help.
Tech Support:
(855) 888-2039
[email protected]
Hours of Operation:
Monday - Friday: 8:30AM - 6:00PM PST
Saturday: 9:30AM - 3:00PM PST
-CyberPowerPC Support
A:AnswerThank you for reaching out. This PC should be able to run Blender as it does meet the minimum system requirements. If you have any further questions or concerns then please do not hesitate to give our tech support agents a call for any assistance; we're always happy to help.
Tech Support:
(855) 888-2039
[email protected]
Hours of Operation:
Monday - Friday: 8:30AM - 6:00PM PST
Saturday: 9:30AM - 3:00PM PST
-CyberPowerPC Support
A:AnswerThe cpu cooler is not good enough to cool the i7 properly, but for $30-$100 you can get a good enough cpu cooler which is what I did. The intake fans on the side do the job just fine no issues there. Numbers: While on the stock cooler my CPU was basically overheating and would stay at 80c - 90c under regular loads. Once I installed a Noctua cooler I get temps that max at 60c. Runs great and everything else in the build is great.
A:AnswerThank you for reaching out to us. The manufacturer, model, and specifications of the components included with this system may vary depending on what was currently available at the time the PC was built. If you have any further questions or concerns then please do not hesitate to give our tech support agents a call for any assistance; we're always happy to help.
Tech Support:
(855) 888-2039
[email protected]
Hours of Operation:
Monday - Friday: 8:30AM - 6:00PM PST
Saturday: 9:30AM - 3:00PM PST
-CyberPowerPC Support
