“If I connect it to a 4K monitor, will I be able to watch 4K movie using installed video card?”
Answer This Question
1-2 of 2 Answers
first there no installed video card. only onboard 1 VGA, 1 HDMI. you could get a better card but you will need to get a power supply that will plug into the card. i search online and i found this answer. and in my opinion i would say no it will not work. ."UHD 630" is not a display interface its a GPU. 4K requires HDMI 2.0 or Display Port 1.4 and its 30 hz not 60 hz without a real GPU. 2560x1440 is max for HDMI 1.3 The maximum pixel clock rate for HDMI 1.0 is 165 MHz, which is sufficient to allow 1080p and WUXGA (1920×1200) at 60 Hz. HDMI 1.3 increases that to 340 MHz, which allows for higher Max resolution (WQXGA, 2560×1600) 3,840x2,160 pixel resolution at 60fps, is only possible if you have at least DisplayPort 1.2 and Multi-Stream Transport capable monitor. You need at a minimum the GT 1030 GPU. This card has HDMI 2.0b and Single Link-DVI so you can have 4K resolution @60hz with HDCP 2.2 It WILL NOT give you 1440p @144hz 4096 x 2160 4K is NOT Ultra HD 3840 x 2160
Sorry, there was a problem. Please try again later.No. Existing on board video is not 4k. You would have to upgrade both the video card and power supply.
Sorry, there was a problem. Please try again later.