Questions & Answers

Name: Epson - 120" EpiqVision Ultra LS500 4K via Upscaling PRO-UHD Short Throw Laser Projector with HDR (screen included) - White
Brand: Epson
SKU: 6429450
Price: 5999.98 USD
Rating: 4.7 (24 reviews)

Epson - 120" EpiqVision Ultra LS500 4K via Upscaling PRO-UHD Short Throw Laser Projector with HDR (screen included) - White

Model:: LS500WATV120EP; |
SKU:: 6429450

User rating, 4.7 out of 5 stars with 24 reviews.

Highly rated by customers for:

Show only Answered Questions

Page Showing 1-20 of 73 questions

Ask a Question

QuestionAre there wall height requirements for the 120 inch screen?
Asked 3 years ago by John.
- Answer Hello John. The following dimensions can be a good reference point to know how much room you will need for optimal screen placement on a wall. The overall dimensions of the screen measure 105.5" x 59.7" x 1.2". The LS500 should be placed at a distance of 20.4" from the display. The projector surface to the base of the image should measure 14.7," and the surface of the projector to the top of the image should measure 73.6". Regards, Kevin - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
QuestionWhat comes in the box when I purchase?
Asked 4 years ago by Nina.
- Answer Screen, streaming media player and projector, please note that the box is huge
  Answered 4 years ago by JStanley
  Answer this question
QuestionDo any of your stores have this set up on display?
Asked 5 years ago by Will.
- Answer Hi Will, Yes! And more stores are being setup this month. You can go the “Where to Buy” section on Epson dotcom to find your local Best Buy Magnolia where it is displayed. Hopefully there is a store close to you since this is an EPIC display. Regards, Mark - The Epson Team.
  Answered 5 years ago by MarkTheEpsonTeam
  Answer this question
Questioncan be this be used outside? (Stored inside out of the weather, but set up for backyard movie night)
Asked 4 years ago by Keith.
- Answer Hi Keith, We recommend using the EpiqVision Ultra LS500 in a fixed position in your living room or home theater. Using it outside may expose it to humidity and dust that could affect the operation of the projector. Regards, Mark - The Epson Team.
  Answered 4 years ago by Epson
  Answer this question
QuestionDoes it need to project a full 120" or can I shrink to fit a wall with 90" of space? Does it require a special screen to project on or a simple white wall surface? /
Asked 4 years ago by SaltArmyWI.
- Answer Hi SaltArmyWI, You can display a 90" diagonal image by moving the projector to within 12.8" to 20.8" from the viewing surface. This is the range the built-in Zoom feature can accommodate for a 90" display. You can project on any light-colored surface, but the ambient-light-rejecting screen that comes with the projector will give you the best image. Regards, Mark - The Epson Team.
  Answered 4 years ago by Epson
  Answer this question
QuestionHow big is the shipping box?
Asked 4 years ago by Xman944.
- Answer Hi Xman944, The 100" screen model’s box dimensions are 92" x 22" x 22" at 86 lbs. The 120" screen model’s dimensions are 120" x 22" x 22" at 103 lbs. The screen and projector are shipped in one box with the screen material in a roll. We recommend two people carry the box. The screen comes rolled up. Regards, Nancy - The Epson Team.
  Answered 4 years ago by Epson
  Answer this question
QuestionWill this work in Europe? Can it accept both 120 and 240v?
Asked 4 years ago by CA.
- Answer Hi CA, The Epson 120" EpiqVision™ Ultra LS500 Short Throw Laser Projection TV with 4K PRO-UHD and HDR100 requires from 100-240 VAC ± 10%, 50/60 Hz to operate. If you move the projector to another region, there may be support issues with local Epson affiliates. Regards, Mark - The Epson Team.
  Answered 4 years ago by Epson
  Answer this question
QuestionHow far from the screen should the projector be placed, screen to lens distance?
Asked 2 years ago by MA.
- Answer Hello MA. The distance can vary from 7 to 23 inches depending on screen size. Please visit our official Epson Support page and review the "Projector Placement" section in the User's Guide for more details. Regards, Kevin - The Epson Team.
  Answered 2 years ago by Epson
  Answer this question
QuestionI have the epson ls500 and I pair it with my nakamichi 9.2.4 sound system. I also use Xbox, my TV cable line. Is there anyway I can add an extra hdmi port, since the nakamichi uses up the hdmi arc port and then I have just one port for TV and xbox?
Asked 2 years ago by Andy.
- Answer Hello Andy. The LS500 includes 2 HDMI ports in total. Unfortunately, there is no way to add an additional port to the projector. Regards, Kevin - The Epson Team.
  Answered 2 years ago by Epson
  Answer this question
QuestionCan it be mounted on the ceiling and the image flipped?
Asked 3 years ago by Rik.
- Answer Yes
  Answered 3 years ago by Champion
  Answer this question
QuestionIs the screen acoustically transparent so I can place my in- wall center channel speaker directly behind the screen?
Asked 3 years ago by Peter.
- Answer Hello Peter. Unfortunately, the Epson 120" screen is not acoustically transparent. We recommend mounting a center speaker directly below the screen. Regards, Kevin - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
QuestionWait, so is this LS500 4k or 1080p?
Asked 3 years ago by Drewdwn.
- Answer Hi drewdwn3434, The EpiqVision Ultra LS500 Projector uses 4K Enhancement Technology which shifts each pixel to double Full HD resolution on screen. Regards, Mark - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
QuestionCan the projector be mounted on an arm coming down from the ceiling or must be on table below? Thanks
Asked 3 years ago by Eric.
- Answer Hi Eric, The EpiqVision LS500 is designed sit on a table, not to be mounted or hung. Regards, Mark - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
QuestionCan it go up to 150” screen? What distance away from the wall would it need to make the image that large?
Asked 3 years ago by Anonymous.
- Answer Hello. The maximum supported size for the LS500 is a 130" screen. To have the projector fill that size, you must place the projector approximately 23 inches from the screen. Regards, Kevin - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
QuestionIn another question response the screen is described as "rolled up." Does the screen come as a ceiling mounted, motorized retractable display? e.g. https://elitescreens.com/products/starling-tab-tension-2-series/ Thanks. Tim
Asked 3 years ago by My2SonsAreMarines.
- Answer Hello My2SonsAreMarines. The LS500 bundled display is a fixed frame screen. Unfortunately, it does not have motorized retractable display functionality. Regards, Kevin - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
QuestionCan you set the projector on top of center speaker, or will it distort the image during loud scenes?
Asked 3 years ago by Anonymous.
- Answer Hi, We recommend sitting the LS500 on a stable table top. A speaker may cause unwanted movement and instability. Regards, Mark - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
Questionif I set up multiple LS500 projectors, can I get them to sync and play the same video from a single stream/device?
Asked 3 years ago by Anonymous.
- Answer Hello. Unfortunately, the LS500 projector cannot sync multiple projectors to play content simultaneously. Regards, Kevin - The Epson Team.
  Answered 3 years ago by Epson
  Answer this question
QuestionIf my table to place the projector on is 17.7 inches tall how far away would the projector have to sit?
Asked 4 years ago by Jo.
- Answer Hi Jo, If the projector is 2.68 feet from the viewing surface the image would be 130", measured diagonally. If you move the projector closer to 1.31 feet from the viewing surface, the image would be 65" diagonal. Regards, Mark - The Epson Team.
  Answered 4 years ago by Epson
  Answer this question
QuestionI’m using a Bluetooth transmitter in the 3.5 is there a way to use arc at the same time?
Asked 4 years ago by Mballantyne.
- Answer Hello Audio. Unfortunately, you cannot use the Bluetooth transmitter and ARC simultaneously. The Epson LS500 Projector only supports using 1 source at a time. Regards, Kevin - The Epson Team.
  Answered 4 years ago by Epson
  Answer this question
QuestionCan it be ceiling mounted?
Asked 4 years ago by Rockhead.
- Answer Hi Rockhead, The EpiqVision Ultra LS500 is not designed to be ceiling mounted. Regards, Mark - The Epson Team.
  Answered 4 years ago by Epson
  Answer this question

Showing 1-20 of 73 questions

Questions & Answers

Epson - 120" EpiqVision Ultra LS500 4K via Upscaling PRO-UHD Short Throw Laser Projector with HDR (screen included) - White

Q: QuestionAre there wall height requirements for the 120 inch screen?

Q: QuestionWhat comes in the box when I purchase?

Q: QuestionDo any of your stores have this set up on display?

Q: Questioncan be this be used outside? (Stored inside out of the weather, but set up for backyard movie night)

Q: QuestionDoes it need to project a full 120" or can I shrink to fit a wall with 90" of space? Does it require a special screen to project on or a simple white wall surface? /

Q: QuestionHow big is the shipping box?

Q: QuestionWill this work in Europe? Can it accept both 120 and 240v?

Q: QuestionHow far from the screen should the projector be placed, screen to lens distance?

Q: QuestionI have the epson ls500 and I pair it with my nakamichi 9.2.4 sound system. I also use Xbox, my TV cable line. Is there anyway I can add an extra hdmi port, since the nakamichi uses up the hdmi arc port and then I have just one port for TV and xbox?

Q: QuestionCan it be mounted on the ceiling and the image flipped?

Q: QuestionIs the screen acoustically transparent so I can place my in- wall center channel speaker directly behind the screen?

Q: QuestionWait, so is this LS500 4k or 1080p?

Q: QuestionCan the projector be mounted on an arm coming down from the ceiling or must be on table below? Thanks

Q: QuestionCan it go up to 150” screen? What distance away from the wall would it need to make the image that large?

Q: QuestionIn another question response the screen is described as "rolled up." Does the screen come as a ceiling mounted, motorized retractable display? e.g. https://elitescreens.com/products/starling-tab-tension-2-series/ Thanks. Tim

Q: QuestionCan you set the projector on top of center speaker, or will it distort the image during loud scenes?

Q: Questionif I set up multiple LS500 projectors, can I get them to sync and play the same video from a single stream/device?

Q: QuestionIf my table to place the projector on is 17.7 inches tall how far away would the projector have to sit?

Q: QuestionI’m using a Bluetooth transmitter in the 3.5 is there a way to use arc at the same time?

Q: QuestionCan it be ceiling mounted?

QuestionAre there wall height requirements for the 120 inch screen?

QuestionWhat comes in the box when I purchase?

QuestionDo any of your stores have this set up on display?

Questioncan be this be used outside? (Stored inside out of the weather, but set up for backyard movie night)

QuestionDoes it need to project a full 120" or can I shrink to fit a wall with 90" of space? Does it require a special screen to project on or a simple white wall surface? /

QuestionHow big is the shipping box?

QuestionWill this work in Europe? Can it accept both 120 and 240v?

QuestionHow far from the screen should the projector be placed, screen to lens distance?

QuestionI have the epson ls500 and I pair it with my nakamichi 9.2.4 sound system. I also use Xbox, my TV cable line. Is there anyway I can add an extra hdmi port, since the nakamichi uses up the hdmi arc port and then I have just one port for TV and xbox?

QuestionCan it be mounted on the ceiling and the image flipped?

QuestionIs the screen acoustically transparent so I can place my in- wall center channel speaker directly behind the screen?

QuestionWait, so is this LS500 4k or 1080p?

QuestionCan the projector be mounted on an arm coming down from the ceiling or must be on table below? Thanks

QuestionCan it go up to 150” screen? What distance away from the wall would it need to make the image that large?

QuestionIn another question response the screen is described as "rolled up." Does the screen come as a ceiling mounted, motorized retractable display? e.g. https://elitescreens.com/products/starling-tab-tension-2-series/ Thanks. Tim

QuestionCan you set the projector on top of center speaker, or will it distort the image during loud scenes?

Questionif I set up multiple LS500 projectors, can I get them to sync and play the same video from a single stream/device?

QuestionIf my table to place the projector on is 17.7 inches tall how far away would the projector have to sit?

QuestionI’m using a Bluetooth transmitter in the 3.5 is there a way to use arc at the same time?

QuestionCan it be ceiling mounted?