“I plan to pair the Epson LS800 with the SilverFlex 120 inch screen. The projector is currently placed on a 16 inch table top to project to the screen on the wall. What has to happen if I change table to a 18 inch or 14 inch ones later?”
Answer This Question
1-3 of 3 Answers
Yes
Sorry, there was a problem. Please try again later.I just bought this combo. My table is about 21" so combined with the height of the projector (6.14") it is the max you can project on a standard 8' wall. Meaning if it the table is any higher than 21" the image will not project perfectly. To answer your question, if you have a 16" table, you should be able to install the screen on an 8' wall with up to 5" of space from the top of the screen to the ceiling. If you change the table to an 14" height, you'll just need to adjust the height of the projector on the side closer to the wall. There is a nob underneath that can be adjusted. You might also have to move the table closer to the wall. If you increase the height to 18" then you'll need to raise the front height of the projector and/or move the table farther away from the wall
Sorry, there was a problem. Please try again later.Hello. When moving the placement of the LS800, you will likely experience image quality or shape distortion. This can be adjusted by going into the installation menu under settings or downloading the Epson Setting Assistant app on an iOS or Android device with a camera. Regards, Kevin - The Epson Team.
Sorry, there was a problem. Please try again later.