Questions & Answers

Q: QuestionDoes this mount have any safety certifications?

• A:Answer Yes, it is UL safety certified, ensuring its strength and mounting structure integrity.

Q: QuestionWhat is the maximum weight this projector mount can hold?

• A:Answer This Epson projector ceiling mount has a 25-lb. weight capacity.

Q: QuestionHow is this projector mount installed?

• A:Answer It can be flush mounted to the ceiling or used with a 1-1/2" NPT column.

Q: QuestionDoes this mount allow for adjustments to the projector's angle?

• A:Answer Yes, it allows for independent roll, pitch and yaw adjustments for precise projector registration.

Q: Questionhow far down does the mount hang from the ceiling with the 3 inch pipe? I am framing my basement and need to keep the projector as high as I can. Also the feature section says this can be mounted flush to ceiling without the pipe, has anyone done this?

Asked 5 years ago by Cowboy.

• A:Answer With the 3-inch pipe you will be looking at about 7 inches down from the ceiling. I am looking at the mount and I don’t know how you could get it flush without the pipe. I’ll attach a picture so you can see how mine looks.

  Answered 5 years ago by ChefGVerified Purchase

  • 
  • 
  Helpful (12)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionMy 5040ub projector that I just bought weights 31lbs online y'all recommend this ceiling mount. Yet the mount only holds 25lbs. Will this mount hold up my 5040ub projector?

Asked 8 years ago by Jonny.

• A:Answer I've had mine hooked up for 4 days now with no noticeable issues. I've been checking daily since I had the same concerns but so far so good.

  Answered 8 years ago by msboblinuxVerified Purchase

  Helpful (9)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionwill this work with the Epson HC 4000?

Asked 7 years ago by Bart.

• A:Answer Yes, I am currently in the process of installing this mount with my Epson Home Cinema 4000 projector. I attached the bracket to the projector two days ago and am waiting on an HDMI cable that I ordered to mount to ceiling. The mount does really well as it can be configured a multitude of ways to fit pretty much any mounting pattern that a projector may have so no issues there. The only thing is that this mount is only rated to hold 25lbs and the HC 4000 weighs like 23lbs so it's a bit close for comfort but should be totally fine. I'd recommend this mount since I'm going to mount mine with confidence that it won't fall on my head while I sit under it.

  Answered 7 years ago by joeybVerified Purchase

  Helpful (7)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHi, I recently purchased Epson 2250 projector and planning to mount it to my basement ceiling with slightly tilted/angled down. Will this mount be compatible with Epson 2250? Thanks.

Asked 4 years ago by I1.

• A:Answer Hi I1. Yes, the Epson Home Cinema 2250 projector can be mounted from the ceiling. Regards, Bobby - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI know you said this stand works with a 5040ub projector. But the stand holds 25lb but the projector weights 31.51lbs. So my question is, will this hold up my 5040ub projector safely?

Asked 8 years ago by Chris.

• A:Answer I had the same concerns but mounted my 5040UB to it this past weekend and it's doing very well. The mount is solid and does not seem to be struggling at all with the large projector. I check it daily and everything is as I'd expect it.

  Answered 8 years ago by msboblinuxVerified Purchase

  Helpful (6)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this mount be extended, or use a longer than 3" connector?

Asked 5 years ago by Bri21.

• A:Answer Yes it is a threaded pipe. You would need to get a longer piece of threaded pipe.

  Answered 5 years ago by RodvangoVerified Purchase

  • 
  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I use this mount without the 3" extension column? I have a low ceiling.

Asked 8 years ago by jhoff.

• A:Answer No the 3 " extension is required

  Answered 8 years ago by ChurchVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIf using this for the 5050ub projector, how much further forward is the lens from the mounting point?

Asked 4 years ago by EmJay.

• A:Answer If you are mounting it from a ceiling you have options based on your mount and it’s adjustment capabilities. I was able to adjust mine down to 7 inches from the center of the mount to the front of the lens. The unit is fairly heavy so you need to remember the further back you adjust your center line you may have to compensate for additional tilt based on the weight of the unit.

  Answered 4 years ago by ValueVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this mount work on a ceiling that is not flat ? Vaulted?

Asked 6 years ago by SantaCruz831.

• A:Answer No. It has no angle brackets. You'll need to mount a triangle block to your beam to create a flat mounting space.

  Answered 5 years ago by Fitzy

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have to install an Epison projector in the roof of a training classroom and I would like to know if there is a longer ceiling mount that will allow the projector to drop below ceiling tiles.

Asked 7 years ago by ITDepartment.

• A:Answer The guys that installed this mount in my home theater just took the smaller down rod to Home Depot and had a longer one made. Worked out great.

  Answered 7 years ago by ChrisVerified Purchase

  Helpful (5)Unhelpful (2)ReportAnswer this question

Q: QuestionWill the Epson universal projector ceiling mount kit work with the Epson 5050ub projector? Just curious about the weight limit.

Asked 4 years ago by JB.

• A:Answer Hi JB. Yes, the Epson Universal Projector Mount (ELPMBPJG) is compatible with the Home Cinema 5050UB projector. Regards, Bobby - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhich mount is compatible with the Epson 3200

Asked 5 years ago by Steve.

• A:Answer Hi Steve, You can use the Epson - Universal Projector Ceiling Mount Kit to mount your Home Cinema 3200 projector to the ceiling. Regards, Mark - The Epson Team.

  Answered 5 years ago by Epson

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this Epson - Universal Projector Ceiling Mount Kit - White compatible with the Epson Home Cinema 3800 4K PRO-UHD 3-Chip Projector?

Asked 2 years ago by Fenderock.

• A:Answer yes

  Answered 2 years ago by VirdalNVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionHello, I recently attached the mounting bracket designated for the EpicVision Mini EF12 Projector. Can this universal mount work with the 75x75 VESA mount pattern?

Asked 4 years ago by austinjawn.

• A:Answer Hello austinjawn. Unfortunately not, the Epson universal projector ceiling mount kit is not designed to work with Vesa mounts. Regards, Kevin - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionHi will this work with an Epson 4100?

Asked 5 years ago by Anonymous.

• A:Answer Hi, We recommend a ceiling mount that has four support points rather than three like the Universal Projector Ceiling Mount Kit. Visit the Epson support site for recommended mounts for the PowerLite 4100. Please use a standard safety cable if you mount the projector from your ceiling. Regards, Mark - The Epson Team.

  Answered 5 years ago by Epson

  
  Helpful (1)Unhelpful (0)ReportAnswer this question