“Do I need installation or can you just put the tube in the window?”

1-4 of 4 Answers

• My window is 44” wide would the window kit allow for that?

  Answered by Katie141718 6 years ago

  • 

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• Hi Kitty! Thank you for your inquiry. We were able to see per the Use and Care Guide to extend both sides of the exhaust hose, install the connector and affix the other connector into the window slider kit and seal. You are able to locate this information in the Use and Car Guide on page 6-7. We hope this helps! -Thanks!-

  Answered by FrigidaireSupport 7 years ago

  • 

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• I'd recommend using the panel that it comes with. I tried cardboard- not strong enough. Just sticking the ducting out the window leaves too large an opening for the cool air to escape as well- unless you already have a very small opening. But it doesn't cool well, so you don't want lose any cool air.

  Answered by Frank 7 years ago

  • 

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• You will need some minor installation, but nothing too worksavvy. The frame needs put into the window to hold the tubing in place

  Answered by jessica 7 years ago

  • Verified Purchase
  • 

  Helpful (1)Unhelpful (2)

  Report

  Sorry, there was a problem. Please try again later.