Skip to contentGo to Product Search
Main Content

Questions & Answers

No content
  • The text on the image reads: "Frigidaire 72 J Fan Speed Filter".
  • The text on the image reads: "FRIGIDAIRE 72° 2 Fan Speed Auto - Mode - Fan Speed - Temperature".
  • The text on the image reads: "Scheduler Connect Fan Feo Cool Only Mode 72 Temp Auto H Med Fan Speed Filter."
  • The text on the image is: "Frigidaire".
  • The text on the image reads "3 FEMINITY FIBER."
  • Alt View 2. Frigidaire - 450 Sq. Ft. 10,000 BTU Smart Window Air Conditioner - White.
  • Alt View 3. Frigidaire - 450 Sq. Ft. 10,000 BTU Smart Window Air Conditioner - White.

Frigidaire - 450 Sq. Ft. 10,000 BTU Smart Window Air Conditioner - White

Model:
FHWW103WB1
SKU:
12376970
$315.18
Page Showing 1-3 of 3 questions
Ask a Question

  • QuestionCan this model be hooked up to either 220 or 110 ?

    Asked by Anonymous.

    • Answer Hi there! Thank you for your interest with our product. No, the Frigidaire air conditioner model FHWW103WB1 is specifically designed for 115V/120V (110-120 volt) power outlets and cannot be plugged into a 220V/240V outlet. Attempting to connect this 115V unit to a 220V outlet will cause damage to the unit. If you require a 220V unit, you would need to look for a different, higher-capacity model. - Patrick

      Answered by FrigidaireSupport

  • QuestionShould the remote have a LCD display to show the temperature where the remote is and the set point like my other Fridgidaire AC has? Did I receive the wrong remote with my purchase?

    Asked by Remote.

    • Answer Hi there, valued consumer! Based on the Frigidaire manual for the 10,000 BTU smart window AC that cools about 450 sq. ft. (such as model FHWW104WD1), the remote control is a simple button remote and normally does NOT have its own LCD temperature display. The temperature and settings are shown on the air conditioner’s control panel display, not on the remote. The unit’s digital display shows the set temperature during operation. The remote control simply sends commands (power, mode, fan, temperature up/down, etc.). The instructions for operating the unit say the same steps apply to both the control panel and the remote, meaning the remote duplicates the buttons but does not act as a separate thermostat display. What This Means for Your Question - No, the remote for this model normally does NOT show: - The room temperature at the remote - The set temperature on an LCD screen - Yes, that is normal for this model. - Many other Frigidaire AC models have remotes with LCDs or a “Follow Me/Remote Sensor” feature, which is probably the type you had before. - Maico

      Answered by FrigidaireSupport

  • Questionhow much does this Frigidaire window air conditioner weigh ?

    Asked by tilly.

    • Answer Hi tilly, thank you for your question! It weighs approximately 57 pounds. — Reed

      Answered by FrigidaireSupport

Page 1, Showing 1-3 of 3 questions