“I have the same question as above.Why can't I put this in a 24" opening if the unit itself is 23.6 " wide without the side curtains?!”
Answer This Question
1-4 of 4 Answers
It should fit in a 24" window if you don't install the slide frames. Those are the slides on each side that take up the extra space in the window so bugs and external air don't get in. You will have to close the gap with duct tape or some type of foam. Not sure if that will void the warranty though.
Sorry, there was a problem. Please try again later.Our window opening width is less than 24", yet that width is at the inner rail for our double-hung window. Outside (exterior) of that inner rail, the width expands, of course, because the window moves up and down there in that groove. On installing this unit, I was able to extend both side curtains slightly. Hope this helps.
Sorry, there was a problem. Please try again later.This requires a minimum window opening of 29 inches because with window mount type is pleated, so you need sufficient clearance on both sides.
Sorry, there was a problem. Please try again later.Hi Blueman! Thank you for your inquiry. In order for your air conditioner to be installed properly, you will need to install the window kit as well. For properly installation, we strongly recommend following the Installation Guide to its entirety. We hope this helps! -Thanks!-
Sorry, there was a problem. Please try again later.