A:AnswerHello ED - Thank you for reaching out about this excellent microwave. As this model does not have a handle, no width will be added with the door open at 90 degrees. Let us know if you have any more questions. - JB
A:AnswerHi Amanda - Thanks for viewing GE! The dimension from the back of unit to front legs is approximately 9 3/4". Also, we suggest viewing the following link - MICROWAVE AIR CLEARANCE - COUNTERTOP ONLY MODELS: https://products.geappliances.com/appliance/gea-support-search-content?contentId=21668 - Keep in touch at GEAppliances.com. Sue
A:AnswerHi Curt - Thanks for considering GE Model # JES1072SHSS! This model cannot be mounted under a cabinet. Models PEM31SFSS and JEM3072SHSS are compatible with Optional Undercabinet Hanging Kit JXA019K (sold separately). Keep in touch at GEAppliances.com. Sue
A:AnswerHi Ronda - Thanks for your loyalty! Model JES1072SHS is 12 3/4" deep (Dimensions: 10 3/16 H x 17 5/16 W x 12 3/4 D). We currently do not offer a model 12" deep. Also, we suggest viewing the following link- MICROWAVE AIR CLEARANCE - COUNTERTOP ONLY MODELS: https://products.geappliances.com/appliance/gea-support-search-content?contentId=21668 - Keep in touch at GEAppliances.com. Sue
A:AnswerHi - Thanks for choosing GE and welcome to the family! The microwave requires a 120 volt, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 amp circuit breaker or time-delay fuse. For best operation, plug this appliance into its own electrical outlet to prevent flickering of lights, blowing of fuse or tripping of circuit breaker. We suggest viewing page 5 of the Installation Guide at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40733-1.pdf - Keep in touch! Sue
A:AnswerHi GiGi - We certainly appreciate your loyalty! Model JES1072SHSS is 10 3/16"H x 17 5/16"W x 12 3/4"D and can be placed in a cabinet as long as you allow 3" of air clearance on both sides and the top and 1" clearance in the rear. Microwaves need adequate air clearance on each side, the rear and the top to function properly. This allows good circulation for the intake and discharge air vents. The comparable model is GE Profile™ 1.1 Cu. Ft. Countertop Microwave Oven Model #:PEM31SFSS (Dimensions: 12 1/8H x 24W x 12 7/8D). This model is compatible with optional 27" Trim Kit JX827SFSS and 30" JX830SFSS for installation in a cabinet. We suggest viewing the Quick Specs at the following link for cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEM31SF_EF_BM_FM_R2_17.pdf - Thank you for making GE Appliances a part of your home! If you have any additional questions, do not hesitate to ask, we are happy to help at GEAppliances.com. Sue
A:AnswerHi Guff - Thanks for viewing GE Model JES1072SHSS! GE Countertop Microwave control panels are not backlit, which means that the lettering on the keypads do not have lighting behind them. Keep in touch at GEAppliances.com. Sue
A:AnswerHi Ginnie - Thanks for viewing GE! All of our microwaves are hinged on the left side. This means the door will open at the right and swing to the left. Most models have a 100 degree door swing. Microwave doors are not reversible.
Allow 1/2" clearance on the hinge side if the microwave is against a wall or deep cabinet. Keep in touch at GEAppliances.com. Sue
A:AnswerHi Alix - Thanks for choosing GE! Model # JES1072SHSS is not compatible with a hanging kit. GE® 0.7 Cu. Ft. Capacity Countertop Microwave Oven
Model # JEM3072SHSS is compatible with Optional Undercabinet Hanging Kit JXA019K (sold separately). Do not install directly against a side wall or cabinet and allow 2" air clearance on each side of the microwave. No additional air clearance is required in the rear beyond the included spacer/rear brackets. If installed in a cabinet with the hanging kit, allow 2" on each side and at the bottom. Keep in touch at GEAppliances.com. Sue
A:AnswerHi Jenn - Thanks for considering GE! Countertop microwaves need adequate air clearance on each side (3"), the rear (1") and the top (3") to function properly. This allows good circulation for the intake and discharge air vents. The front edge of the microwave (measured at door) should sit at least 3" or more back on the counter or shelf to avoid accidental tipping. See MICROWAVE AIR CLEARANCE - COUNTERTOP ONLY MODELS: https://products.geappliances.com/appliance/gea-support-search-content?contentId=21668 - Keep in touch! Sue
A:AnswerHi LSB - Model JES1072SHSS is not compatible with a trim kit. This model is intended for countertop use. GE Profile™ 1.1 Cu. Ft. Countertop Microwave Oven
Model # PEM31SFSS is compatible with Built-In Kits JX827SFSS (27") and
JX830SFSS (30") sold separately. Keep in touch! Sue
A:AnswerHi 4Green - The unit can be placed on a shelf above a counter. The dimensions are: 10 3/16 H x 17 5/16 W x 12 3/4 D. Microwaves need adequate air clearance on each side, the rear and the top to function properly. This allows good circulation for the intake and discharge air vents. Allow 3" of clearance on both sides and the top and 1" clearance in the rear. The front edge of the microwave (measured at door) should sit at least 3" or more back on the counter or shelf to avoid accidental tipping.
If located on the counter near a range, we recommend locating it at least 2 ft away. See MICROWAVE AIR CLEARANCE - COUNTERTOP ONLY MODELS: https://products.geappliances.com/appliance/gea-support-search-content?contentId=21668 - Keep in touch! Sue
A:AnswerHi Rosie - The microwave is manufactured globally. GE Appliances products are designed by GE Appliances engineers in the United States. Many are manufactured in the U.S. and others are made globally to our specifications. The country of origin is shown on the Model/Serial rating plate as well as the packaging. Manufacturing facilities (plant sites, where appliances are made) can and do change from time to time because GE Appliances continues to seek the most efficient manufacturing processes available. We make products all over the world for a Global marketplace. Therefore, your best source for manufacturing location is the packaging/product itself. Also, check out MADE IN AMERICA: https://www.geappliances.com/ge/usa/ - We'd love to have you in the family! Sue
A:AnswerHi Brina - Model JES1072SHSS is designed for countertop use. A mounting bracket is not included and it cannot be mounted over a range. We suggest viewing GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven
JVM3160RFSS. Mounting bracket included. Thanks for viewing GE. Keep in touch at GEAppliances.com. Sue