A:AnswerHi Howie- We suggest to view our Haier 24" Over-The-Range Microwave HMV1472BHS: https://www.bestbuy.com/site/haier-1-4-cu-ft-over-the-range-microwave-with-sensor-cooking-stainless/5711947.p?skuId=5711947 - You can view the Installation Instructions at the following link for more details (see page 4): http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=MW-OTR_24in_HMV1472BHS_Installv9.pdf - We hope it fits! Due to age, it would probably not be cost effective to repair your microwave. For assistance with repairs, we suggest to contact the manufacturer (Sharp) for assistance. SUEatGEA
A:AnswerHi Jerry- We certainly appreciate your loyalty! All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Note: When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. Also, all over-the-range microwaves can be vented to the outside using standard 3 1/4" x 10" rectangular or rigid 6" round ducting and should line up with your existing duct. They are all designed for adaptation to the following three types of ventilation: *Outside exhaust (horizontal), *Outside exhaust (vertical), *Recirculating (non-vented). You can view the Top Cabinet Template and Rear Wall Template online: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-41080.pdf- Thanks for checking with us. Enjoy! SUEatGEA
A:AnswerExpect $100 plus a service call fee to fix numbers. Or you could remove the microwave to take to a shop.. The range underneath will need to be moved out either way. If you can work around the bad numbers and it still heats you can stretch out the life time. New GE microwaves can be found around $200 but you still need to install. New has a 1 yr warantee and your credit card may extend that further. Be aware that the power cord hole and screw holes seem to keep changing locations with new models or other brands. That means you may have to re-drill up to 3 holes.
A:AnswerHello AA - The model where you posted this question (JVM3160RFSS) will work well as a replacement for model JNM3161RFSS. The dimensions are the same for both models. - TREY@GEA
A:AnswerHi Wholesome- We know you have choices and appreciate the trust you've placed in us! Thanks for your loyalty. We have great news. Yes, you can choose any model to replace your JVM1630WJ. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Also, check out our GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven
JVM7195DKWW. You'll love the dark gray, easy-clean enamel interior with steam clean option. Messes inside the microwave are not as visible and easy to wipe away after steam loosens food grime. Keep in touch. With so many choices, we are always glad to help make your buying decisions a bit easier! SUE@GEA
A:AnswerHi Kam- Thanks for choosing our GE® Over-the-Range Microwave Oven with Recirculating Venting
JNM3163RJSS! We certainly appreciate your loyalty. Enter your existing microwave's model number at the following link to download the Installation Instructions regarding removal: http://www.geappliances.com/ge/service-and-support/literature.htm?icid=GEARsupportflyout-manuals - You can also contact our GE Answer Center at 1-800-626-2005, Monday - Friday: 8 a.m. - 10 p.m. ET, Saturday: 8 a.m. - 7 p.m. ET. Thanks for reaching out to us! SUE@GEA
A:AnswerHello - this is Nancy at GE Appliances and I am happy to help you. Yes, this microwave offers a timer function that can be used at any time, including when the microwave is operating. I hope this helps! Thanks for checking with us!
A:AnswerHello Captgeb - this is Nancy at GE. We're sorry to hear that your microwave is not working properly and I am happy to help you with a great replacement model.
The good news is that all of our 30" Spacemaker over-the-range microwaves are designed to be installed in the same standard upper cabinet space (30" min. width, 12" min.-13" max. depth, 66" min. mounting height). The height and depth of the models may vary slightly, but any of our new models could work in your current space. A model that you may like is the JVM6175DFWW.
You will need to use the mounting brackets and hardware that come with the new microwave. The mounting kits have changed over the years and are not interchangeable.
I hope this information is helpful! Thanks for checking with us!
A:AnswerHello,
Thank you for your interest in the GE Over-the-Range Microwave model JVM3160DFWW.
The model does not feature a shelf inside. It does have a
Turntable On/Off control which is a great option.
Donna with GE
A:AnswerThe minimum distance from the door hinge side to the adjacent wall should
equal 1/2". To review additional installation information, please review this model on our GE Appliances website and choose "Installation Instructions" on the left-hand side of the page.
A:AnswerThe models JVM3162RJ5SS and JVM3160RFSS have similar but different installation requirements, and they don't share the same mounting holes. For more information you can visit the installation manual for model JVM3160RFSS here: https://files.bbystatic.com/IWRKFwfDvJrx6nVe9qcPEw%3D%3D/Installation%2BInstructions
A:AnswerYes, the template should be trimmed down according to the cabinet it is being installed on. The template states: 1. Fit template to bottom of upper cabinet. If cabinet bottom has a frame around it, measure frame thickness and trim along edges A, B, C, and D
as needed to make up for frame thickness. Trim lines for ½”, ¾” or 1” frame thickness are on template.
