Questions & Answers

Q: QuestionThe old microwave was GE model JVM3160DF2BB. Will the previous bolt holes in the microwave top (27" center to center) match up on this model?

Asked 5 years ago by JMB2.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Black

• A:Answer I purchased a 2023 JVM3160DFBB (version JVM3160DF9BB) to replace a 2014 JVM3160DFBB (JVM3160DF2BB). The bracket is different (only one horizontal bracket as opposed to a 3-sided bracket with the earlier version). And the newer version only uses two mounting bolts at the top instead of three. A new hole will need to be drilled for one of the upper mounting bolts. The new bracket has two bottom tabs instead of 4, but the old bracket appears reusable after bending down the two interior tabs.

  Answered 1 year ago by GarrettS

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWhat is the width of GE Profile microwave?

Asked 5 years ago by LauC.

• A:Answer Look at the specs on the description right on the Best Buy site.

  Answered 5 years ago by MGCHIVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI am replacing a model JVM1650WH Spacemaker Over-the-range microwave, with this model (Internet #207025738 Model # JVM6175SKSS ) . Will it fit? Does it need any special hanging parts? Thank you.

Asked 5 years ago by SueJ009.

• A:Answer Hi SueJ009- We certainly appreciate your loyalty and for the opportunity to provide assistance with a replacement microwave. They are basically the same size (WxHxD) (in.) 29 7/8 in x 16 13/32 in x 15 1/4 in / JVM6175SKSS: 29 7/8 in x 16 5/16 in x 15 9/16 in). In fact, all GE 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions. the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. We’re glad to have you in the family. Keep in touch at GEAppliances.com. Enjoy! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy 1.5 year old GE OTR microwave is not heating food - it sounds fine like it is working but food is cold ! I felt sides of microwave and they seem warm to the touch. Is this magnetron problem? I know it's out of warranty but only 1.5 years -ugh

Asked 5 years ago by CK.

• A:Answer I also have a GE OTR Microwave JVM3160RF8SS that has failed twice and does not heat... first time was a door Limit Switch- really piece of junk GE should reimburse failing after less than two years...

  Answered 9 months ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI need to replace my model JVM1540DP188 this looks like it but don't want to make an incorrect purchase Please help

Asked 5 years ago by JVM1540DP188.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Black

• A:Answer Hi - We certainly appreciate your loyalty and for the opportunity to provide assistance with a replacement model! Yes, GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160DFBB is a great choice. It has the same dimensions and similar features so will fit in the same space as your current model. Take a look at the Quick Specs: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=340168_jvm3160df_c3.pdf - Actually, all 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. Keep in touch at GEAppliances.com for all your appliance needs! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIt shows the clock time in Green, yet a review claims it is White?? I just ordered this model today because Best Buy said it is in Green. I want it to match my ranges clock below which is in Green. Also please confirm it comes with a charcoal filter.

Asked 5 years ago by Mellie.

• A:Answer Hi Mellie- Thanks for choosing GE Model # JVM3160RFSS! We apologize for any confusion regarding the LED display color. As of August 2017, the LED color is white (green prior to August 2017). Also,Recirculating Charcoal Filter JX81L is included. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes it have a light under microwave?

Asked 5 years ago by Sherry.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Black

• A:Answer Hi Sherry - Thanks for your interest in GE Model # JVM3160DFBB! Yes, this model has cooktop lighting (under microwave) with Bright/Night/Off settings. We’d love to have you in the family. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat wattage does the GE microwave model JVM3162RJ3SS ,serial number FL204966L have.

Asked 5 years ago by Pooh.

• A:Answer Hi Pooh- Thanks for choosing GE Model #JVM3162RJ3SS! The cooking wattage is 950. We’re glad to have you in the family. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the finish high glossy or a matte?

Asked 5 years ago by julie.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Bisque

• A:Answer Hi Julie- Thanks for considering GE Model JVM3160DFCC! The finish is glossy. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow do you change the power level from hi to low

Asked 5 years ago by Krazee.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Black

• A:Answer Hi Krazee - Thanks for choosing GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160DFBB and welcome to the family! The power level may be entered or changed before or during cooking. To change: 1. Press Power Level button. 2. Enter new power level by using the number pads or press the Power Level button multiple times until you find the level you want. 3. After you have selected the power level, wait five seconds. The display will go back to the Cook Time screen. 4. Enter cooking time and press START. Or: 1. Press Cook Time button. 2. Enter your cooking time. 3. Press Power Level button. 4. Enter new power level by using the number pads or press the Power Level button multiple times until you find the level you want. 5. After you have selected the power level, wait five seconds. The display will go back to the Cook Time (Enter Time) screen. 6. Press START (High 10 (100%); Low 2 or 3 (20 or 30%). We suggest viewing page 7 of the use and Care Manual at the following link for complete details including examples of uses for various power levels: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40669-6.PDF - Keep in touch at GEAppliances.com. We are always eager to assist! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe need to replace a 1999 GE JE1650 GA 002 over-the-range microwave, which is installed with a trim kit. What model will fit? Thanks.

Asked 5 years ago by Amy.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Bisque

• A:Answer Hello Amy - Thank you for reaching out about your microwave. We are happy to help. The cutout in your cabinetry will need modification in order to install a new microwave. No new models require that large of a cutout. Please feel free to reach out to us for more help. - John

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionhow do you change the light bulbs for fhe surface light underneath the unit?

Asked 5 years ago by Joy.

• A:Answer Hello Joy - Thank you for reaching out to us with your question. We are happy to help. Full instructions for changing the surface light bulbs can be found on page 16 of the manual here: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40669-6.PDF Please let us know if we can be of further assistance. - John

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhen using the vent, where does the heat exit? Our old microwave had visible vents at the top of it.

Asked 5 years ago by Kyleigh.

• A:Answer Hello Kyleigh - Thank you for your interest in the GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160RFSS; we are happy to help! This model comes from the factory set up for external venting. You can view this model specifications and installation information here: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=340169_jvm3160rf_c3.pdf We are glad you checked! Keep in touch. Olga

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionMay need to replace my GE microwave .Mod.JVM1650WB005 ( year 2001) What Model will fit the horizontal exhaust hole thru the wall ?

Asked 5 years ago by robert.

• A:Answer JVM3160DFWW - I just bought this model and the exhaust can be either top or rear exit. I replaced a 10 year old Frigidaire unit and the rear exit exhaust matched up without issues. This model did come setup for top exit from the factory, so you have to remove and rotate the exhaust motor and remove 2 metal tabs to accommodate for a rear exit exhaust setup. See Pic

  Answered 5 years ago by JamesVerified Purchase

  • 
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI need a stainless steel microwave which will be over the stove and under a cabinet. The back height has to be 16” tall because of the back splash granite I have. Most of the stainless steel microwave I have seen are 16 1/2. Do you have any 16”?

Asked 5 years ago by Suzan.

• A:Answer Hi Suzan - Thanks for your interest in JVM3160RFSS! We currently do not offer an over-the-range model that is 16" or less in height. Therefore, modifications to the backsplash may be necessary. We suggest to view the Dimensions Guide at the following link: https://files.bbystatic.com/XJwD5pXZi%2BUkE1jRqZe4qw%3D%3D/B6676FA2-87CF-4364-94D0-EBC92B029BCB.pdf - We regret we are unable to accommodate your request and apologize for any inconvenience this may cause. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI’m replacing my GE microwave model JVM1870sK03, now discontinued, with JVM3160rFSS. The trouble is the mounting bracket for the older model is partially cemented at the bottom due to a backsplash installation. R the mounting brackets the same?

Asked 5 years ago by Bobbie.

• A:Answer Hello Bobbie - Thank you for reaching out to us regarding your microwave replacement. We appreciate your loyalty and we happy to help! When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. The mounting brackets are not the same. We are glad you checked. Olga

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this have the same dimensions as Electrolux EI30MH55GS -- the microwave it would replace?

Asked 5 years ago by Replacement.

• A:Answer Hi - Thanks for considering GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160RFSS! It appears the dimensions for Electrolux EI30MH55GS are as follows: Width: 29 15/16"; Height: 17"; Depth: 16 5/8". GE® JVM3160RFSS is 29 7/8"Width x 16 1/2"Height x 15 1/4"Depth. We suggest to view the Quick Specs at the following link for complete details: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=340169_jvm3160rf_c3.pdf - All GE 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. We hope this is helpful. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the warranty, and how does it works and cost.

Asked 5 years ago by Paul.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Black

• A:Answer Hello Paul - Thank you for your inquiry; we are glad o assist. GE Appliance warranty protects you against manufacturing defects during the initial first year of ownership. Your microwave warranty begins with the date of purchase. You can view the warranty details for this model in the owner's manual on page 19 at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40669-6.PDF For information regarding purchasing extended warranty, please contact the Best Buy customer service. Thanks for checking. Olga

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the stainless steel finish fingerprint resistant?

Asked 5 years ago by Janie.

• A:Answer Hello Janiee - Thank you for your interest; we are happy to help! The stainless steel finish of the microwave model JVM3160RFSS is not fingerprint resistant. Thanks for checking. Olga

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question