“Does model GPT225SGLWW come with tap fittings and can you please tell me the length of the electrical cord as well as the water reach to the tap and last but not least the length of the drain hose. Thank you .”
Answer This Question
1-3 of 3 Answers
Hi Linda - Thanks for choosing GE Model GPT225SGLWW! The unicouple hoses and faucet adapter are included. Dishwasher unicouple hoses are 32" from back of unit to the unicouple connection. The hose comes out of the back near the back left corner. The power cord will extend 5 feet from the left rear top corner as you face the dishwasher. Remove the existing strainer or aerator and screw on the aerator adapter. It fits most standard faucet spouts. An Aerator Faucet Adapter adapts your kitchen faucet to accept the dishwasher hose connection and reduces splashing in the sink when dishwasher is not hooked-up. The Unicouple slips onto the aerator adapter and locks into place to supply hot water to the dishwasher through the top hose. Used water drains through the lower hose and out the bottom of the unicouple into the sink. The Unicouple faucet adapter provides simple, quick connect and disconnect of hot water to the dishwasher. A pressure-release valve lets you disconnect hose from faucet without splashing. We suggest viewing the Installation Guide at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-4000205.pdf - If you have any additional questions, do not hesitate to ask, we are happy to help at GEAppliances.com! Sue
Sorry, there was a problem. Please try again later.Tap fittings are included. The power cable is 6 feet long. The hoses (the water supply and drain hoses are both connected to the faucet connection) runs about 32 inches.
Sorry, there was a problem. Please try again later.yes i comes with the fittings you will need and the hose is 3 to 4 feet long
Sorry, there was a problem. Please try again later.