A:AnswerIt sit there, but you can wipe up with small towels. Basically not easy, I bought it for the extra 4” inch height. 4” inches doesn’t seem like much but it sure helped.
A:AnswerHi! Thanks for reaching out. The riser that you're looking at here is not compatible with your washer. Also, we're seeing that the dryer model number is Canadian. If you're located in Canada, you can use the information found in an article on our website titled REQUESTS FROM OUR CONSUMERS IN CANADA for further help. The washer that you've listed does not have a pedestal or riser available to it. We do hope this is helpful! All the best. -Michael@GEA
A:AnswerHello- Thanks for your question. We are happy to help! It depends which tray you have it may prevent or cause interference with opening the drawer. We have a low-profile floor tray is ideal when you have a front-load washer on a pedestal with drawer; the lower sides lets you easily open the drawer. Please see the following link: https://products.geappliances.com/appliance/gea-support-search-content?contentId=37077&_ga=2.26055421.1738487097.1651512251-286710438.1648489339&_gac=1.250225074.1649717591.EAIaIQobChMImZ3M7YyN9wIVnGxvBB01OgI6EAAYASAAEgI88_D_BwE If you have any questions in the future, please let us know. We are happy to help! Joyce@GEA
A:AnswerThanks for reaching out to us about this great pedestal! It is only designed to fit with GE Appliances washers and dryers. We do not recommend installing them with appliances made by other manufacturers as they have not been tested or approved for this configuration. If you have any more questions for us, please let us know because we're happy to help! -Chris@GEA
A:AnswerHi there, thanks for asking! This pedestal is only meant to be installed on the appropriate GE branded washer/dryer. We've not tested our accessories for use with other branded appliances and vice versa. If you have an LG appliance, we'd recommend reaching out to them to determine which pedestal will work for your dryer. Hope this helps! -Michael@GEA
A:AnswerIt won’t work unfortunately and I’m waiting for them to pick up this order and will never buy anything from Best Buy again. The rep from Best Buy advise that this is compatible and they were completely wrong
A:AnswerHello- We appreciate your question and are happy to help! This isn't considered a pedestal, it is a 4 inch riser with an integrated drip pan. If you have any additional questions in the future, please let us know. We are always happy to help! Joyce@GEA
A:AnswerHey there! We appreciate your interest in a pedestal for your front-load washer, and are sorry to hear your current pedestal doesn't appear to be a good fit for your unit. We know that may be an inconvenience. We can advise model GFW850SSNWW can be installed with a pedestal, but it would actually be compatible with part number GFP1528SNWW, rather than the one you purchased. You may be able to obtain that pedestal with your local dealer, or if necessary you can reach out to our parts department at 1-877-959-8688. We hope this information is helpful, and are happy to assist with any other inquiries or concerns. Best wishes! -Sarah@GEA
A:AnswerHello and this is usually caused by the appliance either not being level or from unbalanced load. You need to check to make sure washer is level front to back and left to right using a level. You provided us the accessory number for a pedestal and it too has leveling legs that may need adjustment. For unbalanced load you just need to pause the cycle and then lift lid and redistribute the wash inside. Hope this helps. Geoff@GEA
A:AnswerHello. We appreciate your interest in this laundry pedestal! If your washer and dryer are stacked together, we don't recommend you installing them as one unit with a pedestal as well, for both accessibility and safety reasons. We also cannot recommend using our GE products in combination with another brand; again, this is because such a combination hasn't been tested for safety or reliability. We regret any inconvenience this may cause, and are glad to help with any other questions or concerns. Best wishes! -Sarah@GEA
A:AnswerHi,
Thanks for asking! Your loyalty to GE Appliances is greatly appreciated and we're happy to help. We found that this pedestal (GAF140SSNWW) is compatible with your appliances. Let us know if you have any concerns. Have an amazing day!
-Sylvia@GEA
A:AnswerJust to follow up on earlier answer, our washer is model GFW148SSMWW and dryer is model GFD14ESSNWW.
p.s. we've had some negative experiences with other brands but now, besides the washer and dryer, our home also has GE refrigerator, ovens, and dishwasher. Happy to report all have worked great with no problems!
A:AnswerGreetings,
We appreciate you reaching out! Yes, this pedestal will work with the model washer you provided. Let us know if you have other questions. Have a great one! Mike@GEA
A:AnswerHello Jimbo, thank you for your question. We are sincerely sorry your washer and dryer are not fitting properly with this riser. We truly understand how that would be frustrating. This is the correct riser for both units. In this case, we recommend you follow the installation instructions for the riser, linked here: https://files.bbystatic.com/jtxe7fVdCznmHY8yV64lFw%3D%3D/ea04a96a-dd70-414b-b84f-fa45d8955654.pdf Please feel free to reach out to us should you have any questions or concerns about your appliances. We are always here to help. -Chris@GEA