“My GE needs to be leveled. What size should the washer/dryer tool wrench be in order to adjust the leveling legs?”
Answer This Question
1-1 of 1 Answer
Hey there, and thanks for this great question! We know making sure the unit is level is important, and we're glad to help. The Installation Instructions have a ‘Tools You will Need’ section that specify you would use two 10” adjustable wrenches and an 8” pipe wrench while installing the overall unit. Those Instructions also have details on how to level and stabilize the unit specifically, on page 17. When the appliance is in its final position, you can tilt it forward until the rear legs are off the ground, then set it down gently to allow the rear legs to self adjust. You can screw the front leveling legs up or down to make sure the appliance is level, turn the lock nuts on each leg up toward the base of the unit and make it snug with a wrench. If viewing the Installation Instructions may be helpful, you can do so on our GE website by looking up the model number and going to the product page; there is a link for the Installation Instructions on that page. We hope this information is helpful, and are glad to assist if you have any other concerns or inquiries. We wish you all the best! -Sarah@GEA
Sorry, there was a problem. Please try again later.