A:AnswerHi - Black Stainless Steel is fingerprint and smudge resistant. Easily wipe clean with a soft, clean cloth or microfiber cloth. Explore our sleek Black Stainless Steel appliances: https://www.geappliances.com/ge/black-stainless-steel-appliances.htm - Thanks for your interest! Sue
A:AnswerHi cypressdeb - Thanks for choosing GE! Check out the Quick Specs at the following link for all compatible trim kits: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - Keep in touch at GEAppliances.com - Sue
A:AnswerI seriously doubt you need a child lock. It is the most difficult microwave door to open that I've ever seen. You have to push the button very hard and deep to get it to open. In fact, I do NOT recommend this microwave. We have already had 2 issues with it within 6 weeks of owning. We're currently without it because the button broke! Waiting for the parts to come in to fix it. Not nearly the quality of our last GE microwave that lasted 16 years without a problem.
A:AnswerCall GE again for repair ASAP if this is under warranty. This is NOT normal. I had the same problem went I purchased this microwave a few weeks ago. It would take 6 or 7 tries to open the microwave, and then it would work for a few hours, then it would stop working again. The repair was to replace the console on the right. where the button is located as well as the console face on the left. When I asked about this problem, the service technician said something was wrong with the plastic piece behind the button or the hinges themselves, ie. the plastic piece wasn't lifting the hinges correctly or the hinges wouldn't lift for the door to open. Mine, currently works smoothly, for now. Good luck!
A:AnswerHi AntC - GE Profile™ Series 2.2 Cu. Ft. Countertop Sensor Microwave Oven PES7227SLSS is intended for countertop use only. It is not compatible with a trim kit. The built-in capable model is GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227SLSS. It is compatible with GE® Required 27" Built-In Trim Kit JX7227SLSS Stainless and GE® Required 30" Built-In Trim Kit JX7230SLSS Stainless. We suggest to view the Quick Specs document at the following link for more details including cabinet cutout dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - Thanks for choosing GE! Sue
A:AnswerHi - To lock or unlock the controls, press and hold Cancel/Off pad for 3 seconds. Here's the link to the Owner's Manual: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40780-1.pdf - Keep in touch at GEAppliances.com - Sue
A:AnswerI don’t know what the replacement model is but you do need a trim kit with the microwave. It took a long time to receive the trim kit and had to have someone from BB install. Once in place it is beautiful and I’m very happy with it.
A:AnswerALL newer GE microwaves use a COMPLETELY different trim kit than their older microwaves (my older GE microwave was about 6-7 years old) ….so yes u will
need to buy a new trim kit.....sorry
A:AnswerHi Ed- We certainly appreciate you loyalty! The comparable model is our GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227DLWW. It is compatible with 27" Built-In Trim Kit JX7227DLWW (White); 30" Built-In Trim Kit JX7230DLWW (White). We suggest to view the Quick Specs for cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - Keep in touch at 1-800-626-2005 or GEAppliances.com - Sue
A:AnswerHi Submariner- Model PEB7227SLSS is gray. It is compatible with GE® Required 27" Built-In Trim Kit JX7227SLSS (Stainless) and GE® Required 30" Built-In Trim Kit JX7230SLSS (Stainless). See the following link
Microwave - PEB7227 / PES7226 Stainless or Slate Option: https://products.geappliances.com/appliance/gea-support-search-content?contentId=36888 - Keep in touch! SUE@GEA
A:Answer$139.99 But all they do is unbox and set in place and install trim. If your new microwave is larger or smaller and you want it to fit properly in your opening, it is up to you to add or reduce the spacer(s) under the microwave. Installation crew will not do this. Also trim may not match your existing cabinet color or oven below trim. I was lucky, I modified my old trim to fit the new GE microwave and added spacers so the new one would fit in the cabinet exactly like the old one did.
A:AnswerHi - We're excited to hear of your interest! If you are wanting stainless steel, we suggest our GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227SLSS (Gray). It is compatible with GE® Required 27" Built-In Trim Kit JX7227SLSS (Stainless) and GE® Required 30" Built-In Trim Kit JX7230SLSS (Stainless). View a photo at this link: https://products.geappliances.com/appliance/gea-support-search-content?contentId=36888 - If you want the microwave to be black with stainless steel trim, choose PES7227DLBB (Black). It can be used with the stainless steel trim kits above. Check out the Quick Specs for details/dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - (Countertop PES7227SLSS is not compatible with a trim kit). Keep in touch at 1-800-626-2005 or GEAppliances.com. Congratulations on your new home! SUE@GEA
A:AnswerHi KentK- Model PEB7227BLTS (Black Stainless) has a dark gray door. The trim kit is black stainless. See Quick Specs for trim kits: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - Model PEB7227DLBB (Black) has a black door. The trim it is black. See Quick Specs for trim kits: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - Model PEB7227SLSS (Stainless Steel) has a dark gray door. The trim kit is stainless steel or Slate (dark gray). See Quick Specs for trim kits: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - The trim kits are sold separately. Keep in touch! SUE@GEA
A:AnswerHi CToo - We certainly appreciate your loyalty! Built-in trim kits are not interchangeable. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model. GE Profile™ Series PEB7227DLBB is compatible with GE® Required 27" Built-In Trim Kit JX7227DLBB. We encourage you to view the Quick Specs at the following link for details: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - We're glad to have you in the family! Keep in touch- SUE@GEA
A:AnswerHi NancyG- GE Profile™ Series PEB7227DLBB is compatible with GE® Required 27" Built-In Trim Kit JX7227DLBB and GE® Required 30" Built-In Trim Kit JX7230DLBB. Microwave trim kits are designed to provide a built-in look while also providing air flow necessary to the microwave. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. This trim kit uses air flow from the top, bottom and sides of the trim frame (you can only see the vents when viewing from the top or sides). See Quick Specs for dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - Keep in touch! SUE@GEA
A:AnswerHi Jim124- We certainly appreciate your loyalty and glad to hear you have enjoyed your GE microwave model PEB7226DF2BB. The current model is GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227DLBB. It is compatible with GE® Required 27" Built-In Trim Kit JX7227DLBB (Trim Kits are not interchangeable). We encourage you to view the Quick Specs at the following link for dimensions: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - Keep in touch! SUE@GEA
A:AnswerHello, Thank you for reaching out to us. This model has the following dimensions: 24 1/8 in wide x 14 in high x 19 3/4 in deep. When replacing a built in unit, it is important to also look at the cut out dimensions. For information on the specified cut out dimensions for this model, you can contact us at 1-800-626-2000. Have a good day. Sadie@GEA
