1-5 of 5 Answers
It attaches to the bottom of a cupboard.
Sorry, there was a problem. Please try again later.If the space large enough it would work for the GE Profile Series 1.7 over-the-range Convection/Microwave. Just measure carefully. Ours is in an RV and the front is outside the cabinet by about an inch. It comes with the mounting bracket but needs extra support from an area above unit. Because it's vented through the front there's no need for external venting.
Sorry, there was a problem. Please try again later.i would thank so. it has optional venting so you can vent out the front of the unit.
Sorry, there was a problem. Please try again later.If by "built in" you mean over the counter or stove; the answer is yes. If by "built in" you mean completely enclosed; the answer is no. You must be able to vent out of the back or the top for the convection functions. For microwave cooking the unit will normally vent out of the front of the unit.
Sorry, there was a problem. Please try again later.Hello ARC - this is Nancy at GE and I am happy to help you. I'm sorry, over the range microwaves must be installed over-the-range mounted to the upper cabinets. The bottom of the microwave vents/exhausts either internally or to the outside. If you wanted to place a countertop microwave into a cupboard, the following air clearances are required: 3" on each side, 3" on the top and 1" in the rear. However, in-cabinet installation for countertop microwaves is not recommended without the use of a built-in kit. I hope this helps! Thanks for checking with us.
Sorry, there was a problem. Please try again later.
