“how to operate my hoover power scrub carpet cleaner lost my manual how do I operate the machine?”
Answer This Question
1-10 of 11 Answers
To remove Clean Water tank, press Red release button on top of it. It will tilt forward, pull it out. Because the machine uses an automatic measuring system, you don't have to do that part yourself. Just fill the water compartment with hot tap water, fill the Soap compartment with Cleaning Solution. Set knob on front of it to "Wash". Replace tank by tilting it back in. There is a step-button on the left to release the hinge, and a step-button on the right to operate Power On/Off (like a standard upright vac). Turn it on and squeeze trigger while pushing forward slowly. Go over area, ending with dry pulls/pushes (not squeezing trigger) to pull up water. When Dirty Water tank is full, squeeze the red lever in front. It will unlatch, tilting forward. Pull it out. Release latch in back of tank to loosen cover. Pull the lid/cover off and empty. Replace by tilting it back in. If the tank fills completely you will hear the pitch sound higher and you will lose suction (thanks to the bobber inside). When you've finished, go over the area again; this time with the Mode/Knob set to "Rinse" (the know on front of the clean water tank). This removes the cleaning solution residue and any remaining dirt from the carpet. Good suction, will not leave the carpet soaking wet. Hope this helps. I just used it last night, so this is from memory. Very easy to use.
Sorry, there was a problem. Please try again later.the top tank has to ports "one for water & the there for cleaning solution.' once filled, turn the knob on the front of the water tank to wash and the machine will mix both solutions as you go… the knob turned to rinse will only dispense water. Suction of water is automatic and the dirty warted accumulates into the bottom tank, when full the machine will make a noise to let you know. empty bottom tank….. and repeat……it is simple
Sorry, there was a problem. Please try again later.Go to this link on the Hoover website: http://hoover.com/products/details/fh51102/power-path-pro-advanced-carpet-cleaner/ About 1.5" to 2" under the title of the item is a small link in red letters ["Download the Product Manual"] that will let you download the manual at no cost.
Sorry, there was a problem. Please try again later.http://hoover.com/support/manuals/ They also have a customer support number at hoover.com
Sorry, there was a problem. Please try again later.Go to the Hoover web site to get the manual. You can print it.
Sorry, there was a problem. Please try again later.I believe you can download and print it from the Internet at the Hoover website.
Sorry, there was a problem. Please try again later.Hi Bill! You can always download the manual free of charge on our website. Simply enter your model #FH51102, click on the picture of the machine, then on the red letters that read "Download Product Manual" Hope this helps! -Giselle Hoover Customer Care
Sorry, there was a problem. Please try again later.Why won’t my Hoover shampooer power scrub cut on. I’ve only used it about. 7 times
Sorry, there was a problem. Please try again later.How much cleaner to put in the hoover power scrub xl carpet cleaner
Sorry, there was a problem. Please try again later.Go online to Hover for the information!
Sorry, there was a problem. Please try again later.