“I just bought mine recently and only 2 leds on the fans are working the one fan in the front middle and the back fan the one on the top and bottim aren’t”
Answer This Question
1-5 of 5 Answers
If you open the back of the case, you can trace the wire coming out of the fan to a little back box mounted to the back of the case. It will be a thin wire with a capped, 3-hole connector on it, and you have to plug it into the matching 3 pins on the box.
Sorry, there was a problem. Please try again later.My sons just arrived the same way. Take off the non-glass panel carefully and there should be an RGB controller plug with two 3pin spots not connected. Find the two cables (3 pin connections), match them up and plug them back into the small black box towards the middle of the case. Be sure to try it out before putting the side panel back on.
Sorry, there was a problem. Please try again later.Hello, We're sorry to hear some of your fans aren't working. This may be due to some loose cables, as this can happen during transit. If you find where the working fans are plugged in, you can plug the loose cables in there as well. If you are still unsure of what to do, you can also contact our technical support and they can help lead you through the process!
Sorry, there was a problem. Please try again later.What is the manufactures warranty on the system?
Sorry, there was a problem. Please try again later.did you make sure that the fans are plugged into the mother board. you need to take the back panel off for that
Sorry, there was a problem. Please try again later.