“how to move both of the door hinges? from the right side to the left”
Answer This Question
1-2 of 2 Answers
If you bought the refrigerator from Best Buy and they have a record of the purchase, you can download the manual by selecting "Visit our Support Site", then "Get Product Support", then choose the refrigerator from the list of your products, and select "User Manual" to pull up a PDF. The instructions (with illustrations) start on page 9. But, basically, you can't move the hinges from one side to the other. The refrigerator came with separate left-side hinges that you have to swap for the right-side ones. The hinges aren't reversible.
Sorry, there was a problem. Please try again later.Thank you for your inquiry! To reverse the door hinges on your Insignia™ 11.5 Cu. Ft. Bottom Mount Refrigerator, start by unplugging the refrigerator and removing all contents from the doors. Use a flathead screwdriver or putty knife to gently pry off the top hinge cover on the right side, then unscrew the top hinge and set it aside while someone holds the door. Lift the refrigerator door off the bottom hinge pin and set it aside, then unscrew and remove the middle hinge, followed by lifting off the freezer door. Next, remove the bottom hinge from the right side. Reattach the bottom hinge to the left side of the refrigerator frame, place the freezer door onto the bottom hinge pin, and secure the middle hinge on the left side before placing the refrigerator door onto the middle hinge pin. Finally, attach the top hinge on the left side, ensuring the door is properly aligned before fully tightening the screws. Replace the top hinge cover on the left side and, if necessary, use a level to adjust the doors for proper alignment. Once everything is secure, plug the refrigerator back in. Always refer to the user manual for any model-specific instructions or diagrams. Keith | Insignia Support https://www.bestbuy.com/site/insignia-11-5-cu-ft-bottom-mount-refrigerator-with-energy-star-certification-white/6461500.p?skuId=6461500
Sorry, there was a problem. Please try again later.