A:AnswerThe internal fan will stop when the unit reaches the set temperature.
If the unit is not cooling please visit https://www.insigniaproducts.com/email-us
A:AnswerHi there!
We appreciate your inquiry!
The Insignia 130-Can Beverage Cooler Silver have a product width of 21 1/2 inches. Unfortunately, I couldn’t find the specific measurement with the door open in the search results. For precise details, I recommend you checking the website BestBuy Landing page https://www.bestbuy.com/.
Feel free to ask if you need further assistance!
Kind regards,
Yanne
Isignia Support
A:AnswerThe unit is free standing in the basement. There’s nothing obstructing air flow. I did notice last night that the left side felt warm again. It must happen when unit is running.
What temperature is this unit supposed yo read inside? It never goes to 34 even on bottom of unit
A:AnswerHi Gosha,
You may also use leveling shims for leveling and stabilizing the cooler. If you have any questions or concerns, please feel free to use the link below to reach us or contact our customer service at 1-877-467-4289 Monday–Saturday, 8 a.m. to 9 p.m. CT.
Shai | Insignia Support
https://www.bestbuy.com/site/best-buy-brands/support/pcmcat1693515381920.c?id=pcmcat1693515381920
A:AnswerHello Lights,
We are very sorry to read that the display lights on this unit are not working. I know how inconvenient this must be to you. I understand how important it is to fix it, please try to turn off the unit and unplug it from the power outlet for 60 seconds and plug it back in then test it. If this does not fix the problem, please contact our customer service for further assistance at 1-(877)-467-4289 Monday to Saturday 8am - 9pm CST.
Chelsea
Insignia Support
Please give us a visit at: https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285
A:AnswerPhysical 21.25"W x 31.5"H is the glass of the front door. You will need at minimum 22.5"W x 33.25"H opening to fit it though (very tight fit). The door handle is on the side of the front door so it can't sit completely flush with cabinets. Also notice that this is not meant to be used in an enclosed space. You would need to add additional ventilation to pull the warm air from the back of the unit to the front in order to cool the compressor/electronics at back of the cooler. Hope this helps.
A:AnswerThe front is one smooth piece of glass, the border is a painted graphite painted metal that is under the glass and resembles stainless. The racks are chrome / silver with wood trim on the front. The exterior body (top, sides) are black
A:AnswerThank you for your inquiry! The E4 error code on the Insignia™ 130-Can Beverage Cooler typically indicates a defrost sensor malfunction. This sensor is responsible for monitoring frost buildup and regulating the defrost cycle. When the cooler displays this error, it usually means the sensor is either not functioning correctly or is not being detected by the system. To troubleshoot, you can try unplugging the unit for a few minutes and then plugging it back in to reset the system. If the error persists, inspect the cooler for any visible frost buildup or obstructions near the sensor area, which is often located near the evaporator. Keith | Insignia Support
A:AnswerTo reverse the door on your Insignia™ 130-Can Beverage Cooler, please refer to the user manual for detailed, step-by-step instructions. The manual will guide you through the process safely and accurately. If you need any further assistance or have specific questions, feel free to ask! Patricia | Insignia Support
A:AnswerThank you for your Inquiry! It sounds like the condensation from the cooler is collecting in the white plastic bowl at the back. There should be a drain hole or plug at the bottom of the bowl to allow the water to drain out. You can carefully empty the water from the bowl and check to see if there is a drain mechanism in place. If there is no drain mechanism, you may need to manually empty the water regularly to prevent it from overflowing. If you are still concerned about potential leaks, you can contact the manufacturer for further assistance. Keith | Insignia Support https://www.bestbuy.com/site/insignia-130-can-beverage-cooler-silver/6405496.p?skuId=6405496
