“We purchased this and hooked it up with the digital optical cable but can't get sound through the bar. We know the bar works because it will bluetooth with our phones, just not the tv.”
Answer This Question
1-4 of 4 Answers
Connecting an external Receiver/Amp If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical SPDIF OUT at the rear of the TV. This is active when receiving audio with the programs being viewed no matter what input is being used. 1. Turn off the power to the HDTV and Receiver/Amp. 2. Using an audio cable (optical cable), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the SPDIF OUT audio optical connector at the rear of the LCD HDTV. 3. Turn on the power to the HDTV and Receiver/Amp. 4. Then press the MENU/OK button on the remote control to bring up the On-Screen Display (OSD) menu. 5. Press any navigation arrow button on the remote control to select the Audio menu. 6. Press MENU/OK button on the remote control to enter the Audio sub-menu. Press any navigation arrow button and select SPEAKERS. 7. Press MENU/OK button to select Off so that the sound from the TV will now be routed through your Receiver/Amp system. 8. Press EXIT key to exit the menu display. Note: • Refer to your Receiver/Amp user manual to select the corresponding audio input
Sorry, there was a problem. Please try again later.Set your tv audio out to pcm
Sorry, there was a problem. Please try again later.Go into your TV menu and change the sound output to PCM.
Sorry, there was a problem. Please try again later.If your TV has an optical audio output then it will have a setting for selecting external speaker. Also, optical cable ends are keyed, only fit one way. Look closely, make sure all the way in on TV and speaker.
Sorry, there was a problem. Please try again later.