“Just bought this dryer and it won't dry from the get go. This is in a brand new space, so there is NO LINT BUILDUP. Have tried all the dry settings. The only thing that seems odd is that the "drying" mode light is blinking and the "cooling" is solid.”
Answer This Question
1-3 of 3 Answers
Same here. Tried to swap out the thermal fuse because it stopped heating, but then the inside is totally fried. Don't buy this
Sorry, there was a problem. Please try again later.Unfortunately it seems to be a defect to this particular model, im on my 2nd one in exchange, and same issue.
Sorry, there was a problem. Please try again later.Hi Alex, Based on the manual, if the dryer is not drying anymore, you can follow the steps below: • Your dryer may have moved into the cool-down process of the cycle. This is normal. • Select a cycle other than Air Fluff and a temperature setting that is not “No Heat.” • Do not overload your dryer. Depending on the size of your washer, one wash load should equal one dry load. • Dry heavy items and lightweight items separately. • If you are drying large, bulky items, like blankets or comforters, try repositioning the load to ensure even drying. This may need to be done a few times througout the cycle. • The load may be too small to tumble correctly. Add a few towels or use the Manual Dry cycles. • Clean the lint filter and exhaust duct. • Check the circuit breaker and fuses for your dryer’s electrical connection. • Make sure that the outside exhaust hood opens and closes freely. • Check the exhaust system for lint buildup. Ducting should be inspected and cleaned annually. • Make sure that your exhaust duct is a 4 in. (10.2 cm) rigid or semi-rigid metal duct. Insignia Products Lisa https://insigniaproducts.com
Sorry, there was a problem. Please try again later.