“Will this run a home oxygen concentrator machine such as a Philips Respironics. These are the specs on it. AC Input 120 VAC +/- 10% Power Consumption 350 Watts.”
Answer This Question
1-1 of 1 Answer
Hello, Thank you for your question! Yes — the Jackery Explorer 1000 V2 can run a home oxygen concentrator that draws around 350 W, as long as the device’s power draw stays below the power station’s rated output. The Explorer 1000 V2 has a 1500 W continuous AC output and good surge headroom, which means it can comfortably handle a device pulling ~350 W without overload. The inverter also provides clean pure sine wave power. A few things to keep in mind for reliable operation: Make sure the actual running and startup wattage of your specific oxygen concentrator stays under the unit’s 1500 W limit. Most home concentrators around 350 W should be fine, but some models can have higher startup draws. The total runtime will depend on how long you need to run it and how many other devices you’re powering at the same time — with ~1070 Wh of battery capacity, it might run ~2–3 hours at 350 W on a full charge before needing a recharge (lower if other devices are also plugged in). If you want help estimating how long it will run based on your exact concentrator model and usage, I can help you calculate that too! For more support, feel free to contact Jackery: 📧 hello@jackery.com 📞 +1‑888‑502‑2236 (Mon–Fri, 9 AM – 5 PM PST)
Sorry, there was a problem. Please try again later.