Skip to contentGo to Product Search
Main Content

Questions & Answers

Page Showing 1-20 of 34 questions
  • QuestionHow much peak power can this subwoofer handle?

    • Answer This subwoofer can handle up to 1000W of peak power.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the frequency response for this subwoofer?

    • Answer This subwoofer has a frequency response of 25Hz - 500Hz.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhy are the KICKER Comp R subwoofers legendary?

    • Answer The KICKER Comp R subwoofers are legendary for their performance and reliability.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the benefit of the Forced-Air Cooling feature?

    • Answer The Forced-Air Cooling feature makes this subwoofer 25% cooler than previous versions, increasing reliability.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat size wire can the subwoofer terminals accept?

    • Answer The satin-nickel terminals on this subwoofer can accept up to 12 AWG wire.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the impedance of this subwoofer?

    • Answer This subwoofer has a 2 ohm impedance.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the frequency response range of this subwoofer?

    • Answer The frequency response range of this subwoofer is 25Hz to 500Hz.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the diameter of the subwoofer?

    • Answer This subwoofer has a diameter of 12 inches.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the mounting depth of this subwoofer?

    • Answer The mounting depth for this subwoofer is 5-3/4 inches.
    This question and answer was generated by AI based on customer and product data.
  • QuestionHow much power can this subwoofer handle?

    • Answer This subwoofer can handle 500 watts RMS (250 watts per coil).
    This question and answer was generated by AI based on customer and product data.
  • QuestionDoes this subwoofer have a single or dual voice coil?

    • Answer This subwoofer has a dual voice coil design.
    This question and answer was generated by AI based on customer and product data.
  • QuestionI got a skar rp 1500 watt monoblock amp. Would it be good for 2 of these subs?

    Asked by Miguel.

    • Answer The Skar RP-1500.1D amplifier is rated to produce 1500 watts @ 1-ohm impedance, 930 watts @ 2-ohms impedance. If you were to wire each of the 12" CompR DVC 2-ohm subwoofers coils in series each subwoofer would be a 4-ohm impedance. Then parallel wire those two subwoofers to the amplifier, the amplifier would see a 2-ohm load and develop the 930 watts rated power. That would be 465 watts RMS to each subwoofer. The subwoofer is rated 500 watts RMS, so you are within specifications. As always, set your gains properly and do not clip your amplifier. Enjoy!

      Answered by Kicker Customer Support

  • QuestionProper way to wire this speaker 1 ohm

    Asked by TheregoestheBoom.

    • Answer There are two sets of speaker hook ups. Get a section of speaker wire about six inches long. Make sure both the pair and negative ends of both ends of the wire are showing about one inch of bare wire. Then you simply connect the positive and negative on one side. Then stretch the wire over to the other side and do the same. Connect in parallel. Positive to positive. Negative to negative. Then you take the incoming speaker wire from your amp and connect it to either side of the speaker. Positive to positive. Etc. Now you have a one ohm load of it's a two ohm speaker. It would be two ohms if it were a four ohm speaker.

      Answered by jasondubda1

  • QuestionCan two of these be wired to 1ohm?

    Asked by Blac.

    • Answer I belong to a kicker group and i was told to wire them like this

      Answered by Slappy

  • QuestionWhat square foot box do I need for this speaker

    Asked by Tim.

    • Answer The KICKER CompR Subwoofer is designed to work in both sealed and ported enclosure applications. The sealed box volume range is 1.0 to 2.0 net cubic feet. The ported is 1.75 to 2.25 net cubic feet. I would suggest contacting KICKER tech support for more questions or details in your enclosure needs for this subwoofer as they can help you with any design questions. Support@kicker.com or call 405-624-8510, Mon-Fri, 8-5 Central time. There is also a KICKER app available from your devices preferred App Store.

      Answered by Kicker Customer Support

  • QuestionWhat’s the wattage of these subs?

    Asked by Westonkent.

    • Answer 500rms 1000peak Don't supply more than 750rms to the sub

      Answered by Cheeks3806

  • QuestionWill a kicker 400 watt Amp work for one of these ?

    Asked by Anonymous.

  • QuestionWill a kicker 400w Amp work for one of these?

    Asked by Anonymous.

  • QuestionWhat sub series is better ? Kicker comp R or kicker comp CVR?

    Asked by Wich1isbetter.

    • Answer Kicker comp cvr

      Answered by KevinM